5 ENTERING & SETTING ITEMS
To set the default setting for relay originator report
When this equipment is setup as a relay originator, the report of the transmission to the relay stations is output.
1.Select "05. RELAY ORIGINATOR
REPORT" using the 
or 
but- ton and press the [ENTER] button.
COMMUNICATION REPORT
05.RELAY ORIGINATOR REPORT
2.Select the output setting using the
or 
button and press the [ENTER] button.
[1.ALWAYS]:
To always print a report whenever a document is transmitted.
[2.ON ERROR]:
To only print a report when an error has occurred.
[3.OFF]:
To not print a report automatically.
*Default for North America: [2.ON
ERROR]
Default for Europe: [1.ALWAYS]
3.To print the first page image of the Fax document on report, select "2. ON" and press the [ENTER] button.
y Select "1. OFF" if this option is not required.
*Default: [2.ON]
RELAY ORIGINATOR REPORT 1.ALWAYS
2.ON ERROR 3.OFF
PRINT 1st PG IMAGE? 1.OFF
2.ON
To set the default setting for relay station TX report
When this equipment is setup as a relay station, the report of the transmission to the relay destinations is output.
1.Select "06. RELAY STATION
REPORT" using the 
or 
but- ton and press the [ENTER] button.
COMMUNICATION REPORT 04.MULTIPOLL REPORT 05.RELAY ORIGINATOR REPORT
06.RELAY STATION REPORT
2.Select the output setting using the
or 
button and press the [ENTER] button.
[1.ALWAYS]:
To always print a report. [2.ON ERROR]:
To only print a report when an error has occurred.
[3.OFF]:
To not print a report automatically.
*Default for North America: [2.ON
ERROR]
Default for Europe: [1.ALWAYS]
RELAY STATION REPORT 1.ALWAYS
2.ON ERROR 3.OFF
212 Default Settings for List & Report Output