When using the Automatic Document Feeder (optional) or Reversing Automatic Document Feeder (optional)
When the originals are placed on the Automatic Document Feeder (optional) or Reversing Auto- matic Document Feeder (optional), the uppermost page is the first to be scanned and sent.
1 After aligning the edges of originals, place them with their face up and slide the guides to the width of the originals.
y LT/A4 size originals are rotated 90 degrees so that they are sent as
yYou cannot mix different sizes of originals such as LD (A3) and LT (A4).
yWhen LD, LG,
yTo enter the sender information,
see P.205 “Registering the Terminal ID”.
yWhen LT or A4 originals are placed as shown in the figure on the right, the
A |
B |
When the Reversing Automatic Document Feeder (optional) is installed, you can scan and send
P.79 “Sending