2 BASIC FUNCTIONS
Setting the Transmission Conditions
Setting the Transmission Conditions
Resolution
Set the resolution before you scan the original to be sent. The default setting is "STANDARD". To change the default setting from "STANDARD" to "FINE" or "ULTRA FINE", see the following page: P.178 “Document mode”
yReference
Resolution | Original |
|
|
STANDARD | Original with regular size text |
|
|
FINE | Original with small size text and fine illustrations |
|
|
ULTRA FINE | Original with |
|
|
1 Press the [FAX] button on the control panel.
2 Press the [RESOLUTION] button.
3 Select the desired resolu- tion using the or button and press the [ENTER] button.
yTo cancel the setting, press the [CANCEL] button before you press the [ENTER] button.
ENTER TEL NUMBER(MAX128):
RESOLUTION: STANDARD
FINE
ULTRA FINE
If the remote Fax cannot receive originals with the same resolution, the resolution of the sent original is automatically converted and sent. The finer the resolution is, the longer it takes to send an original.
36 Setting the Transmission Conditions