Manual Reception
Set this mode when the Fax is connected to a line also used for voice telephone calls.
yWhen a document for polling transmission is registered on a remote party, the equipment
can automatically receive the document even if "Manual Reception" has been set.
y Confirm the reception mode on the Function List. (page | P.237 “Function list”) |
Setting of the manual reception mode
1 Press the [USER FUNC- TIONS] button on the con- trol panel and select “01.
DEFAULT SETTINGS”
using the 
or 
but- ton, and then press the [ENTER] button.
y"DEFAULT SETTINGS" screen appears.
USER FUNCTIONS | 4 |
01.DEFAULT SETTINGS
02.LISTS 03.INITIAL SETUP
2 Select “03. FAX SETUP”
using the 
or 
button and press the [ENTER] but- ton.
DEFAULT SETTINGS 01.GENERAL SETTING 02.COPY SETUP
03.FAX SETUP
3 Select “07. RECEPTION MODE” using the 
or 
button and press the [ENTER] button.
4 Select “2. MANUAL RECEIVE” using the 
or 
button and press the [ENTER] button.
FAX SETUP 05.DIAL TYPE 06.REDIAL MODE
07.RECEPTION MODE
RECEPTION MODE 1.AUTO RECEIVE
2.MANUAL RECEIVE
5 Press the [FAX] button to return to the initial screen for the Fax function.
yYou can press the [USER FUNCTIONS] button instead of [FAX] to exit the user func- tions menu and return to the default mode basic screen.
P.24 “Message LCD Screen”
Receiving a Fax 61