Direct transmission
The remote Fax is dialed immediately, and the original will be sent as it is being scanned. This mode is useful if you want to confirm connection to the remote Fax or when you want to send an urgent Fax document. Originals are not stored in memory, and you can only specify one remote Fax at a time.
yYou can use the following dialing methods:
Keypad Dialing (Direct Entry with Digital Keys): | P.41 “Keypad Dialing (Direct Entry with | ||
Digital Keys)” |
|
|
|
One Touch Key Dialing: | P.43 “One Touch Key Dialing” | ||
Abbreviated Dialing: |
| P.46 “Abbreviated Dialing” |
|
Alphabet Dialing: | P.48 “Alphabet Dialing” |
|
yThis function is valid for the current job (one transmission) only.
1 Press the [FAX] button on the control panel.
2 Press the key.
y"DIRECT TRANSMIT" screen appears.
3 Select “1. YES” using the or button and press
the [ENTER] button.
yTo cancel this function, select "2. NO" and press the [ENTER] but- ton to return to the basic screen.
DIRECT TRANSMIT 1.YES
2.NO
DIRECT TRANSMIT
1.YES
2.NO
4 Place the original(s) and perform the transmission operation.
yIf you want to cancel the trans- mission after performing the transmission operation, press the [CLEAR/STOP] button to dis- play the screen on the right.
yIf you leave the equipment for about 45 seconds, it automati- cally returns to the basic screen.
CANCEL THIS JOB? 12345
1.YES
2.NO
Redialing operation is not effective for direct transmission.