Reception Trouble
Check the following points if you are having trouble receiving originals. If you cannot rectify the trouble by checking these points, or trouble not listed below occurs, contact your service techni- cian.
Trouble | Check Point |
|
|
Originals cannot be received even | y Did you replace the handset before you pressed the [START] |
if the [START] button is pressed. | button? When you answer a call on the handset to receive a |
| Fax, not replace the handset until you press the [START] button. |
| y Is the modular cord disconnected? |
| y Is there a problem at the remote Fax? Check this with the party |
| trying to send the original. |
|
|
Paper is not output. | y Is the digital multi function system out of paper? |
|
|
The received original is printed | y Is the original being sent a dirty copy? Check this with the party |
dark and is illegible or black | trying to send the original. |
stripes are printed on the original. | y Is the trouble due to a problem or operator error at the remote |
| FAX? (ex. dirty scan glass or dirty scan lamp) Check this with |
| the party trying to send the original. |
| y Does the same problem occur even if you make a copy on your |
| digital multi function system? If so, clean the recording unit of |
| your digital multi function system. |
|
|
Paper is output but not printed. | y Is there enough toner? |
| y Is the original placed correctly on the remote FAX? Check this |
| with the party trying to send the original. |
|
|
Paper often jams. | y Is the paper cassette size setting correct? |
| y Is the paper cassette properly inserted? |
| y Is the specified paper type being use? |
|
|