To set the default setting for
1.Select "03.
using the or button and press the [ENTER] button.
COMMUNICATION REPORT 01.TX REPORT 02.MEMORY-TX REPORT
03.MULTI-ADD REPORT
2.Select the output setting using the
or button and press the [ENTER] button.
[1.ALWAYS]:
To always print a transmission report whenever a document is transmitted. [2.ON ERROR]:
To only print a transmission report when an error has occurred. [3.OFF]:
To not print a transmission report automatically.
*Default for North America: [2.ON
ERROR]
Default for Europe: [1.ALWAYS]
3.To print the first page image of the Fax document on TX report, select "2. ON" and press the [ENTER] button. y Select "1. OFF" if this option is not
required.
*Default: [2.ON]
MULTI-ADD REPORT 1.ALWAYS
2.ON ERROR
3.OFF
PRINT 1st PG IMAGE? 1.OFF
2.ON
To set the default setting for
1.Select "04. MULTIPOLL REPORT"
using the or button and press the [ENTER] button.
COMMUNICATION REPORT
04.MULTIPOLL REPORT
2.Select the output setting using the
or button and press the [ENTER] button.
[1.ALWAYS]:
To always print a report whenever a document is transmitted.
[2.ON ERROR]:
To only print a report when an error has occurred.
[3.OFF]:
To not print a report automatically.
*Default for North America: [2.ON
ERROR]
Default for Europe: [3.OFF]
MULTIPOLL REPORT 1.ALWAYS
2.ON ERROR
3.OFF
Default Settings for List & Report Output 211