3 ADVANCED FUNCTIONS
Send after scan
When the default setting for the send after scan function is set to “OFF”, this operation allows you to use the send after scan mode for a single transmission. Once that transmission is com- plete, the default status is regained.
This function is selected, every page of the document is scanned into memory before dialing begins.
y Send after scan setting ( P.195 “Secure reception”)
yYou can use the following dialing methods:
Keypad Dialing (Direct Entry with Digital Keys): | P.41 “Keypad Dialing (Direct Entry with | ||
Digital Keys)” |
|
|
|
One Touch Key Dialing: | P.43 “One Touch Key Dialing” | ||
Abbreviated Dialing: | P.46 “Abbreviated Dialing” |
| |
Alphabet Dialing: | P.48 “Alphabet Dialing” |
| |
Group Dialing: | P.50 “Group Dialing” |
|
1 Press the [FAX] button on the control panel.
2 Press the key.
y"SEND AFTER SCAN" screen appears.
3 Select “2. ON” using the
or button and press the [ENTER] button.
4 Select the
[1.DELETE SCAN PAGES]: Deletes the pages which have been scanned.
[2.SEND SCAN PAGES]: Sends the pages already scanned.
SEND AFTER SCAN
1.OFF
2.ON
SEND AFTER SCAN 1.OFF
2.ON
WHEN MEMORY FULL
1.DELETE SCAN PAGES
2.SEND SCAN PAGES
5 Place the original(s) and perform the transmission operation.
y To cancel this function, press the [FUNCTION CLEAR] button to return to the basic screen.
y If you leave the equipment for about 45 seconds, it automatically returns to the basic screen.