2 BASIC FUNCTIONS
4 Press the [START] button on the control panel.
When setting originals on the glass
yWhen you want to send multi- page originals with the current scanning conditions unchanged, place the next original on the glass, and select “1. SCAN NEXT ORIGINAL” on “BUILD FAX JOB” screen, then press the [ENTER] button. After finished scanning of the last page, select “3. COMPLETE” on “BUILD FAX JOB” screen and press the [ENTER] button to send the orig- inals.
yWhen you want to change the scanning conditions for each page, select “2. CHANGE CUR- RENT SETTINGS” on “BUILD FAX JOB” screen and press the [ENTER] button.
For details of this operation, see the following page.
P.39 “Setting the Scanning Conditions for Each Page”
yWhen you want to send single- page original, select “3. COM- PLETE” on “BUILD FAX JOB” screen and press the [ENTER] button to send the original.
When using the (Reversing) Automatic Document Feeder (optional)
The remote Fax is dialed immediately and communication is initiated.
yThe screen on the right may appear when the equipment has failed to detect the original size. In this case,
SCANNING TO MEMORY |
| |
JOB NUMBER | :009 | |
SCANNING | PAGE | :001 |
RESIDUAL | MEMORY | :099% |
ENTER TEL NUMBER(MAX128):
2006-04-10 11:06 M: 100%
RESOLUTION:STANDARD
COMM.OPTION
Select original size
1.LT
2.LD
using the or button and press the [ENTER] button.
42 Specifying the Remote Fax