Panasonic KX-FLB756E manual Jams, When the recording paper is not fed into the unit properly

Page 78

Jams

2	When the recording paper has jammed
	near the drum and toner unit:

Remove the jammed paper carefully by pulling it toward you.

Jammed paper

When the recording paper has jammed near the recording paper exit (Fuser unit):

Remove the recording paper (#), then remove the drum and toner unit to allow the jammed paper to pull free from the rear cabinet ($).

Drum and toner unit

Remove the jammed paper from fuser unit by pulling it upwards carefully.

Caution: Do not touch the bottom of this cover.

It is very hot.

3 Close the printer cover by pushing down on both sides until locked (#). Straighten and reinsert the recording paper into the recording paper entrance ($).

Jammed paper

Recording paper entrance

Printer cover

When the recording paper is not fed into the unit properly

The display will show the following.

Display:

FAILED PICK UP

Remove the recording paper. Straighten and reinsert it into the recording paper entrance.

Recording paper entrance

Image 78

Contents Operating Instructions Warranty Registration Date of purchase600001 08700 to Fax Terms and ConditionsDeclaration of Conformity For your future referenceDate of purchase Serial number TrademarksSafety instructions Important safety instructionsToner cartridge Laser radiationFuser unit Drum unitInstallation Important Information Important InformationMethod of connection Fitting a plug to the mains lead Table of Contents Fax sending/receiving using Multi-Function Station software Using the fax machine as a printerUsing the fax machine as a scanner Advanced featuresOperating instructions AccessoriesIncluded accessories Toner cartridge Complementary starter toner cartridgeToner cartridge 1 pack For replacement, see See Accessory informationModel No Usage Specifications Toner cartridge 2 packs For replacement, see SeeHelp Button Help functionHelp SET Front view Finding the ControlsOverview Rear viewLocation To redial the last number dialledTo insert a pause during dialling Unlocking the shipping lock SetupConnecting the document cover Label for unlockingToner cartridge and drum unit Green drum surfaceToner save feature Paper stacker and paper tray Paper stackerPaper tray Recording paper Adding paperConnections Setting the date and time Date and time, your logo and facsimile telephone numberMenu SET Setting your logo Handset MuteStop To select characters using +or To select characters with the dial keypadDisplay order of characters Enter your facsimile telephone number, up to Setting your facsimile telephone numberDigits, using the dial keypad To delete a numberButton!to use the recall feature Volumes / Recall FeatureAdjusting volume Ringer volumeAutomatic Dialling Storing names and telephone numbers into one-touch dialLower SET Stop Menu SET Stop Menu Editing a stored entryErasing a stored entry SET StopMonitor Using one-touch dialUsing the directory LowerCaller ID Caller ID service from your phone companyTo confirm caller information using the Caller ID list How Caller ID is displayedTo display the caller’s telephone number Viewing and calling back using caller informationStop FAX Start Caller ID Display while viewingDisplay Press w To cancel erasing, press , then p Press wErasing caller information Stop SETFor navigator directory Press or Station keysLower SET Sending Faxes Using the auto document feederREDIAL/PAUSE Scan Resolution FAX Start Sending a fax manuallyUsing the scanner glass Resolution StopScan Documents you can send Sending a fax using one-touch dial and navigator directory Lower Resolution Scan FAX Start StopManual Broad Broadcast transmissionProgramming entries into the broadcast memory Broadcast Manual Broad Menu Lower SETAdding a new entry into the broadcast memory Display Press +or -until the following is DisplayedTo cancel erasing, press Press w Erasing a stored entry in the broadcast memoryTo cancel the broadcast setting Manual Broad Stop Scan Resolution FAX Start SETTo send the same document using the scanner glass Sending the same document to pre-programmed partiesWhen receiving phone calls Setting the unit to receive faxesWhen receiving calls When receiving faxesTurn Auto Answer off by pressing PQ Remote Fax activationTEL mode Answering all calls manually Activating TEL modeReceiving a fax manually FAX only mode All calls are received as faxes Activating FAX only modeIf the FAX on light is off, turn it on by pressing Display Set the fax machine to the desired receiving mode p Using the unit with an answering machineSetting up the fax machine and an answering machine Activate the answering machineExtension telephone How the fax machine and answering machine workReceiving a voice message and fax document in one call Making a copy Stop Copy Start ResolutionCopying To stop copyingTo enlarge a document Using the auto document feederUsing the scanner glass To reduce a documentSetup PC Connecting to a computerInstalling Multi-Function Station software Activating Multi-Function Station software Printing PC Using the fax machine as a printerSetting the printer properties Printing from Windows applicationsUse transparencies designed for laser printing TransparenciesLabels Use labels designed for laser printingEnvelopes Using other applications Using the fax machine as a scannerUsing Multi-Function Viewer Scanning PCRemote Control PC Operating the fax machine from your computerFax sending/receiving using Multi-Function Station software PC FaxIf the fax machine’s memory stores a received fax document Receiving a fax into your PCViewing a received document You can load the document into your PCFeatures Summary ProgrammingGeneral programming method Programming table Basic featuresError OFFHow to set menu options ParallelAdvanced features Normal Setting the connecting tone Setting the Error CorrectionMode ECM Resetting advanced features toError Messages ReportsDisplay message Cause & solution DisplayWhen making a copy, the document being stored exceeds You cannot change the cable type setting feature #15 onWhile using the handset or the monitor. Hang up and try Service personnelOperations GeneralFax sending Receiving mode Fax receivingCopying Using an answering machine Multi-Function StationRemove the document and reinsert it If a power failure occursEven after clicking Cancel, scanning continues Multi-Function Station does not work properlyReplacement Replacing the toner cartridge and the drum unitNew toner cartridge, shake it vertically Surface Recording paper jam Replacement / JamsWhen the recording paper has jammed in the unit Waste disposal methodWhen the recording paper is not fed into the unit properly JamsNear the drum and toner unit White plate and glasses Jams / CleaningDocument jams sending White plate and scanner glassCleaning Lower glassDocument feeder rollers Printed Reports Reference lists and reportsPress wto start printing Specifications Technical data about this productITU-T No Test Chart Paper specifications Panasonic Business Systems U.K GuaranteeCondition of guarantee Please keep these Operating Instructions with your receiptProgram index Code Feature nameIndex IndexPrinter Page Page Sales Department Panasonic Business Systems U.K PFQX1822ZA DM0303NK0

Jams

near the drum and toner unit:

When the recording paper is not fed into the unit properly