4. Telephone
4.7.1 Cordless handset:
Setting the ring delay for night mode
{j/OK}
{>}
{ih}
This setting allows the cordless handset to ring during night mode if the caller waits long enough. After the selected delay time has passed, the cordless handset will ring. If you select “No Ringing”, the cordless handset will not ring during night mode.
1. | Press {j/OK}. |
2. | Select “Handset Setup”, then press {>}. |
3. | Select “Ringer Setup”, then press {>}. |
4. | Select “Night Mode”, then press {>}. |
5. | Select “Ring Delay”, then press {>}. |
6. | Select “30 sec.” or “60 sec.”, then press |
Setting night mode ON/OFF
1.Press {j/OK}.
2.Select “Handset Setup”, then press {>}.
3.Select “Ringer Setup”, then press {>}.
4.Select “Night Mode”, then press {>}.
5.Select “On/Off”, then press {>}.
6.Select “On” or “Off” (default), then press
{>}.
7.Press {ih}.
Note:
LWhen the night mode is turned ON, “[N]” is displayed.
Setting the start and end time for night mode
1.Press {j/OK}.
2.Select “Handset Setup”, then press {>}.
3.Select “Ringer Setup”, then press {>}.
4.Select “Night Mode”, then press {>}.
5.Select “Start/End”, then press {>}.
6.Enter the desired hour and minute you wish to start this feature by selecting 2 digits for each.
L If you use
7.Enter the desired hour and minute you wish to end this feature by selecting 2 digits for each.
L If you use
8.Press {j/OK}.
9.Press {ih}.
{>}. |
7. Press {ih}. |
Selecting categories to bypass night mode
1.Press {j/OK}.
2.Select “Handset Setup”, then press {>}.
3.Select “Ringer Setup”, then press {>}.
4.Select “Night Mode”, then press {>}.
5.Select “Select Category”, then press
{>}.
6.Press the desired category numbers, then press {j/OK}.
L The selected category number will flash. L To cancel a selected category number,
press the number again. The number will stop flashing.
7.Press {ih}.
4.7.2 Base unit:
{SET}
{A}{B} {MENU}
Setting night mode ON/OFF
1.Press {MENU}.
2.Press {#}, then {3}{5}.
3.Press {SET}.
4.Press {A} or {B} repeatedly to select “ON/OFF”, then press {SET}.
33