9. Programmable Features
See page 52 for details.
Code #35: Setting the night mode
NIGHT MODE
PRESS SET
See page 33 for details.
Code #36: Receiving oversized documents
RCV REDUCTION
=ON[±]
To slightly reduce the received fax image when printing, so that the received document will be approximately the same length as the original document.
“ON” (default): The received fax image will be printed slightly smaller than the original image. “OFF”: Deactivates this feature. The received fax image will be printed at the same size as the original image.
Note:
LAn slight margin will be added to the printed documents, and therefore if this feature is turned OFF, the received document will be slightly longer than the original document.
Code #39: Changing the display contrast
LCD CONTRAST
=NORMAL [±]
“NORMAL” (default): For normal contrast.
“DARKER”: Used when the display contrast is too light.
Code #41: Changing the fax activation code
FAX ACTIVATION
=ON[±]
If you wish to use the cordless handset (page 47) or an extension telephone (page 47) to receive faxes, activate this feature and program the activation code.
1.Press {MENU}.
2.Press {#}, then {4}{1}.
3.Press {A} or {B} repeatedly to select “ON”.
4.Press {SET}.
5.Enter your code (2 to 4 digits) using the dial keys
L The default code is “@@@9”. L Do not enter “0000”.
L This activation code will be required when receiving faxes using an extension telephone (page 47).
6.Press {SET}.
7.Press {MENU}.
Code #42: Setting the message alert
MESSAGE ALERT
=OFF [±]
To alert you when a new voice message is recorded. The unit beeps slowly until you listen to the recorded messages.
“ON”: You will be alerted to new messages by a beeping sound.
“OFF” (default): Deactivates this feature.
Code #44: Setting the memory reception alert
RECEIVE ALERT
=ON[±]
To alert you with a beeping sound when a received fax document is stored into memory due to some existing problem.
The slow beeps will continue until you clear the printing problem and make sure the unit is supplied with enough paper to print the stored document.
“ON” (default): You will be alerted to a reception problem by a beeping sound.
“OFF”: Deactivates this feature.
Code #46: Setting friendly reception
FRIENDLY RCV
=ON[±]
To receive a fax automatically when you answer a call and hear a fax calling tone (slow beep). “ON” (default): You do not have to press {FAX/START} for fax reception.
“OFF”: You have to press {FAX/START} for fax reception.
Code #49: Setting the auto disconnection
AUTO DISCONNECT
=ON[±]
To answer a call with an extension telephone in TAM/FAX mode (page 50) and TEL/FAX mode (page 48), activate this feature and program the code.
1.Press {MENU}.
2.Press {#}, then {4}{9}.
3.Press {A} or {B} repeatedly to select “ON”.
4.Press {SET}.
5.Enter your code
L The default code is “@0”.
6.Press {SET}.
7.Press {MENU}.
64