PaperJet 65 user guide – Edition 3 – 8.10.01
6Insert the new assembly into the holder with the electrical contacts facing towards the front of the machine.
2Gently pull the black lever at the side of the printhead assembly to the side to release the cartridge.
7Pull the assembly towards the front of the machine until you hear it click into position.
8 Close the cover.
Changing the ink cartridge
1 Open the printer compartment cover.
3 Lift out the cartridge.
4Remove the new cartridge from its packaging. Holding it by the finger grip, peel off the protective film.
5Insert the new cartridge into the printhead until it clicks into place.
NOTE
It is recommended that the printhead is changed after every six cartridges.
It should be orientated as shown on next page.
54