Microsoft 2045 Where Incoming Message are Delivered Output Tray, Specifying Tray for Lines

Where Incoming Message are Delivered - Output Tray

Where Incoming Message are Delivered - Output Tray

Specifying Tray for Lines

The optional extra G3 interface unit is re- quired.

You can specify the document feed-
ing tray for each port. For example,
you can specify documents received
through the G3 -1 port to be fed to the
“Internal Tray 1” and documents re-
ceived through the G3 -2 port to be
fed to the “Internal Tray 2”, facilitat-	5
ing separation of files.

Note

❒To use this function, specify the port and destination using [Specify Tray for Lines]. See p.132 “Reception Setting”.

Tray Shift

The optional finisher or shift sort tray unit is required.

When the optional finisher unit is se- lected for fax output, you can use the Tray Shift function whenever a fax or report is printed.

This is useful for separating faxes stacked in the finisher output tray. For example, if the previous incoming fax was output to the left, the next in- coming fax will be output to the right and vice-versa.

Note

❒You can turn this function on or off with the User Parameters. See p.147 “Changing the User Parame- ters” (switch 19, bit 0).

93