Microsoft 2045 appendix Standard Message Stamp, Press Sub TX Mode Select Std. Message

Other Transmission Features

Standard Message Stamp

Use this function to stamp a standard message at the top of the first original sent.

There are four types of standard mes- sages: “Confidential”, “Urgent”, “Please phone”, and “Copy to corres. section”

You can also program other messag- es.

4	Note
	❒ While this function is in use, the

third line of the Label Insertion is not printed. See p.70 “Program- ming the Label Insertion”.

❒When there is an image around the area where the standard message is to be stamped, that image is de- leted.

❒To program a standard message, use the Program/Change/Delete Standard Message function. See p.137 “Programming, Changing, and Deleting Standard Messages”.

A Place the originals, and the select the scan settings you require.

Reference

p.11 “Placing Originals”, Fac- simile Reference <Basic Features>

p.27 “Scan Settings”, Facsimile

Reference <Basic Features>

B Press [Sub TX Mode].

C Select [Std. Message].

D Select the standard message to be stamped, and then press [OK].

The selected standard message is shown above the highlighted [Std. Message].

Note

❒To cancel the selection, press [Cancel]. The display returns to that of step C.

❒Programmed standard messag- es are shown in the keys.

❒The machine cannot stamp mul- tiple standard messages.

E Press [OK].

F Dial, and then press the {Start} key.

58