Adaptec PCI Ethernet and Fast Ethernet Adapters manual PCI Bios Settings, PCI Interrupts

Page 17

Installing Your Adapter

PCI BIOS Settings

PCI BIOS configuration options vary widely by system. The follow- ing section discusses representative PCI configuration options, but may not exactly match your computer. (Some computer BIOSs pro- vide no PCI configuration options, but instead automatically config- ure all PCI settings. Your BIOS may not provide the options described below). We recommend that you configure all PCI slots in your system, even those not currently in use, for later convenience. Enter your computer BIOS Setup, and select Advanced Settings from the Main Menu.

PCI Slot Enabled

Bus Mastering

PCI INTA

PCI INT Vector

PCI Bus Latency

Use this setting to enable all PCI slots in your system.

Use this setting to enable PCI bus mastering.

Use this setting to assign an ISA interrupt (10, 11, 12, etc.) to PCI Interrupt Vector A.

Use this setting to assign PCI Interrupt Vector A to the PCI slot(s).

Configure this setting to a value between 40 and 80.

PCI Interrupts

PCI uses an interrupt architecture that maps PCI interrupts to regu- lar ISA interrupts. Some PCI BIOSs will refer directly to the numeric ISA interrupts (i.e., 10, 11, 12) for PCI slots. Other BIOSs will refer to the PCI interrupt used by the slot (i.e., INTA, INTB, INTC, INTD).

All Adaptec PCI adapters use the PCI interrupt INTA, and the ISA interrupt to which it is mapped.

2-3

PCI Ethernet and Fast Ethernet Adapters User’s Guide

Stock Number: 511472-00, Rev. A

Page: 2-3

Print Spec Number: 496708-00

 

Current Date: 5/5/97

ECN Date: 5/97

Image 17
Contents PCI Ethernet and Fast Ethernet Adapters Technical and Product Support Adaptec Technical Support and ServicesElectronic Support Class a Device Certification Statements Sales and Ordering InformationClass B Device Certification Statements Page Page Getting Started Installing Network Drivers Using Emdiag to Troubleshoot Problems Cables System Requirements Getting StartedAdvisories What You Need to KnowConventions Fast Ethernet Ultimate Combo Adapter 10/100 Autosensing ModelsQuartet Adapters Before You Begin Installing the AdapterPage PCI Interrupts PCI Bios SettingsPCI-to-PCI Bridge Chip Configuring Quartet AdaptersTesting the Quartet Configuration Testing the PCI ConfigurationPCI Ethernet and Fast Ethernet Adapters Cable Requirements Connecting to Your Network CableConnector 10Mbps 100Mbps Cable Pins Pinout and Color Requirements Following chart provides cable pinout and color informationConnecting the Quartet Connecting the CableTwisted Pair Crossove Crossover CablesLink Status L.S Diagnostic LEDsRun Emdiag Checking the Connection with EmdiagPage Full Duplex Support Installation Instructions and Optional KeywordsDriver Naming Conventions PCI Ethernet and Fast Ethernet Adapters NetWare Installing and Configuring the Standard Driver for NetWareUsing the Inetcfg utility PCI Ethernet and Fast Ethernet Adapters Select Half Duplex or Full Duplex mode Installing the Duralink Driver for NetWareLoad Cdtdmi Load Failmib Enabling Snmp AgentsLoad Cdtdmi Manual InstallationLoad Failmib Manual Installation Automated NetWare Client InstallationLink Driver Empci DOS ODI ParametersWindows NT Installing the Standard Driver for Windows NTAdding Standard Drivers Remove Existing Adaptec Ethernet DriversConfiguring the Drivers Thin Installing the Duralink Driver for Windows NTAdding Duralink Drivers Configuring the Drivers Configuring the Primary and Backup Ports Snmp Management Station Windows 95 Driver Parameters Windows 95 Installation for PCIWindows Windows for Workgroups Windows for Workgroups Driver Parameters Ndis Installing With LAN ManagerNdis Driver Parameters IBM OS/2 SMP Installing with LAN ServerInstalling the Drivers for a Pre-existing OS/2 SMP Installing OS/2 SMP for the First Time Editing Driver Parameters SCO OpenServer Installing the SCO OpenServer DriverUnix Drivers Configuring the SCO OpenServer Driver SCO Unixware SMP Installing the DriversEMPCI0 EMPCI1 EMPCI2 EMPCI3 Configuring the IP AddressesDo you want to set this machine as a gateway?y/no/ unchanged Using Emdiag to Troubleshoot Problems Emdiag PCI Main Menu Using Emdiag for PCI AdaptersRunning Emdiag Configuration Status Diagnostics Running Remote Diagnostics PCI Device Information Quartet Device Information Isolating Faulty Hardware TroubleshootingReadme Viewer Technical Support InformationUse the following table to help answer common questions Frequently Asked QuestionsPage ANA-6901 and ANA-6901 Combo Adapter SpecificationsANA-6904 and ANA-6904BNC Quartet ANA-6910/FX ST and ANA-6910/FX SC ANA-6910/TX PCI ANA-6911/T4 and ANA-6911/T4 Combo PCI ANA-6911A/TX and ANA-6911A/TX Combo PCI ANA-6911/UC Ultimate Combo ANA-6940/Quartet TX ANA-6944A/TX Quartet ANA-6944/T4/Quartet Straight-through Cable Twisted Pair Cable TypesCrossover Cable Following tables provide cable pinout and color information Pinout and Color RequirementsPin PCI Index Index-3