Adaptec PCI Ethernet and Fast Ethernet Adapters manual Windows NT

Installing Network Drivers

Windows NT 4.0

Note: Consult the \readme\nt351std.txt, \readme\nt351dur.txt, \readme\nt40std.txt, or \readme\nt40dur.txt files for the latest driver information and installation instructions. Some procedures or information may have changed or may not have been available when this user’s guide was printed.

The Windows NT 4.0 driver is in the \winnt\386 directory. To install the Windows NT 4.0 driver for the ANA-6944/TX, your computer must support PCI-to-PCI bridge chips. See Chapter 2, Installing Your Adapter, for information on how to determine if your computer sup- ports PCI-to-PCI bridge chips.

Note: These instructions are for Windows NT 4.0 only. To install drivers for Windows 3.51, see the \readme\nt351std.txt file.

Installing the Standard Driver for Windows NT 4.0

Note: These instructions apply to standard drivers only. If your adapter shipped with Duralink software, see Installing the Duralink Driver for Windows NT 4.0 on page 4-14 or refer to the readme\nt40dur.txt file.

1Place an Adaptec PCI adapter (such as ANA-6911A/TX) in the system.

2Boot your system with Windows NT 4.0.

3Double-click the My Computer icon.

4Double-click the Control Panel icon.

5Double-click the Network icon.

Note: If no drivers are currently installed for Adaptec or Cogent PCI adapters, skip to step 13.

4-11

PCI Ethernet and Fast Ethernet Adapters User’s Guide

Stock Number: 511472-00, Rev. A	Page: 4-11
Print Spec Number: 496708-00
Current Date: 5/5/97	ECN Date: 5/97