Adaptec PCI Ethernet and Fast Ethernet Adapters manual ANA-6911A/TX and ANA-6911A/TX Combo PCI

PCI Ethernet and Fast Ethernet Adapters

ANA-6911A/TX and ANA-6911A/TX Combo PCI

Bus Interface	PCI 32-bit bus master
Hardware Interrupts	PCI interrupt A, supports shared
	interrupts
Base I/O or Memory	Assigned by BIOS
Address
Power Requirements	+5 volts @ 1.5 Amp. max
Environmental
Temperature	0× C to 50× C
Relative Humidity	5% to 85% non-condensing
Altitude	3000m maximum
Network Interface	IEEE 802.3 10BASE-2
Standards
	IEEE 802.3 10BASE-T
	IEEE 802.3u 100BASE-TX
Certifications	FCC Class B
	CE Class B
Network Speeds Supported	10 Mb/s
	20 Mb/s Full Duplex
	100 Mb/s
	200 Mb/s Full Duplex
Network Connectors	RJ-45 female, BNC
Physical Dimensions	5.075" x 3.9" (conforms to PCI Short
	Card specification)
Diagnostic LEDs	Link status (green) normally on
	Network activity (yellow) on when
	activity detected

A-6

PCI Ethernet and Fast Ethernet Adapters User’s Guide

Stock Number: 511472-00, Rev. A	Page: A-6
Print Spec Number: 496708-00
Current Date: 5/5/97	ECN Date: 5/97