PCI Ethernet and Fast Ethernet Adapters
UNIX Drivers
The Adaptec adapters support the following UNIX products (sup- port for some UNIX versions not available on every adapter):
■SCO UNIX System 3.2 v4.2
■SCO Open Desktop 3.0/5.0
■SCO OpenServer 5.0
■SCO Unixware SMP
■Sun Solaris 2.4/2.5
■NextStep 3.2/3.3
The list of supported UNIX systems is updated periodically; contact Adaptec if your type of UNIX is not listed here. The UNIX drivers and installation instructions are available from Adaptec’s BBS, Com- puServe Forum, World Wide Web, and FTP sites.
The Sun Solaris and NextStep drivers are available at the World Wide Web sites of the respective operating system vendors. See the appropriate \readme.txt file for your UNIX operating system.
SCO OpenServer 5.0
The
Installing the SCO OpenServer Driver
1Insert the Unix Drivers diskette into the first floppy drive (usually A).
2Make a directory for the driver, as follows:
mkdir adaptec
3Change to the directory you just created, as follows: chdir adaptec
4Copy the files from the floppy diskette to the hard disk, as follows:
doscp a:\sco5_0\*.*.
PCI Ethernet and Fast Ethernet Adapters User’s Guide
Stock Number: | Page: |
Print Spec Number: |
|
Current Date: 5/5/97 | ECN Date: 5/97 |