Installing Network Drivers
ADAPTEC: Installation Complete
ADAPTEC: Please Reboot the system for the changes to take effect.
Note: The system lists an EMPCI address for each of the
8Reboot the system.
Configuring the IP Addresses
1To begin configuring the IP Addresses for the
/etc/confnet.d/configure
The system lists the devices and displays the following message:
These are the devices available on your system:
1EMPCI_0
2EMPCI_1
3EMPCI_2
4EMPCI_3
Type the number of the device(s) to be configured with inet [?,??,quit]:
2 For the
1 2 3 4
The system displays the following message:
Please enter the IP host name for device EMPCI_0 (default: xxx):
3Enter the name of the host (string). The system displays the following message:
Please initialize the IP address for the host xxx (default: xxx.xx.xx.xx):
4Enter the IP address, or press Enter to use the default IP address. The system displays the following message:
Configure host xxx with the default Ethernet (TM) if config options?: (yes no ClassC BerkeleyC info; default:info):
PCI Ethernet and Fast Ethernet Adapters User’s Guide
Stock Number: | Page: |
Print Spec Number: |
|
Current Date: 5/5/97 | ECN Date: 5/97 |