Pyramid Technologies 4000HD manual

Page 8

RESET HOUR = 10PM – Sets the reset hour for the day (days) outlined above using the UP or DOWN key. The default setting is 10PM.

Note: In some three-shift operations, an individual might punch in prior to the reset period but will not punch out until after the reset period. This is not a problem. The 4000/4000HD will not reset that card until the individual punches out, however, the card number (upper right hand corner of card) should not be issued to any other employee until he/she punches out.

MAX HRS/PUNCH = 13 – The purpose of this feature is to guard against an individual who forgets to punch out. This feature sets the number of hours allowed between punches. For example, if 13 hours is selected using the UP or DOWN key and an individual punches in and then forgets to clock out, the 4000/4000HD will print the next line as an “in” punch if more than 13 hours have elapsed. The time card will show the “in” punch followed below by a space were the “out” punch would have been located and then followed by the correct “in” punch. Hours can be set from 10-99. The default is set at 13 hours.

ROUNDING = NONE – This feature is known as rounded time, flex time, or grace period and only affects how the 4000/4000HD calculates the clock in/out totals and the running totals but does not affect the printed punch in/out time. Many businesses allow a “grace” period for employees when they clock in or out. This is done either to allow for variations in the time shown on different clocks, watches and time recorders throughout a company, or just to make the calculation of payable time simpler by “rounding off” the times recorded on a time clock. Use the UP or DOWN key to select one of the four options listed below:

Press SELECT to return to the main display.

1.NONE – Turns rounding off. With this option, the PTR-4000 will calculate the clock in/out totals and running totals using the actual clock in/out times.

2.5 MIN – This is the “5 minute rule”. With this option, the clock in/out and running totals will be rounded to the nearest 5-minute mark and will round “forward” at 2 minutes before the 5-minute mark and will round “back” up to 3 minutes after every 5-minute mark.

3.10 MIN – This is the “10 minute rule”. With this option, the clock in/out and running totals will be rounded to the nearest 10 minute mark and will round “forward” at 5 minutes before the 10 minute

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Model 4000/4000HD Ready to GO SET-UP Instructions UnpackingProgramming the 4000/4000HD Feature Table Bell SET-UP SET Event # no Page Page Page Time Cards Troubleshooting Changing the Print RibbonPage Frequently Asked Questions Supplies and Optional Accessories Limited WarrantyExtended Warranty Specifications Operating ConditionsPower Failure Pyramid Technologies, LLC Elm St. Meriden, CTPyramid Instrucciones Para Instalacion Paso 1 Desembalar Paso 2 Programar EL 4000/4000HDPaso 3 Listo Para Usar Tabla DE CaracteristicasAbajo Programación DE LA Campana Programación DE Evento # noPage Page Page Page Tarjetas DE Tiempo Cambiando LA Cinta de ImpresionTarjeta SIN LA Impresion O UN Mensaje DE Error Localizacion DE FallasPage Preguntas Comunes El No. de Cantidad La descripción Artículo Especificaciones La Garantía LimitadaPyramid Technologies, LLC Elm Street. Meriden, CT Dimensiones Condiciones de FuncionamientoCorte de Energia CalendarioPyramid 4000/4000HD Inventaire DES Fonctions Deuxieme Etape Programmer LE Modele 4000/4000HDTroisieme Etape Pret a Fonctionner Page Configuration DE LA Sonnerie SET Event # no Page RST=16th & 1st 16e et 1er jour du mois Page Fiches DE Presence Changement DE LA Cartouche D’IMPRESSION Card Feeds with no Print or Error Message Conseils DE DepannageFoire AUX Questions Page Pieces DE Remplacement ET Accessoires Optionnels Garantie Limitee Pyramid Technologies, LLC Elm St.Meriden, CTFiche signalétique Conditions d’utilisation Coupure de courantCalendrier Précision de l’horlogeEs wird empfohlen, diese Anleitung aufzubewahren Inbetriebnahme Schritt 1 AuspackenEinstellungstabelle Schritt 2 DAS Programmieren DES 4000/4000HDSchritt 3 Stempeln Page Einrichten DES Akustischen Signals Ereignisnummer EinstellenSelect Page Page Page Stempelkarten Farbbandwechsel Fehlersuche Häufig Gestellte Fragen Menge Beschreibung Bestell.-NrZubehör Garantie Technische Daten BetriebsbedingungenStromausfall KalenderGenauigkeitsabweichung der Uhr SpeicherkapazitätElm Street, Meriden, CT I2073 Rev a
Top Page Image Contents