Troubleshooting | Clearing Copy Jams |
Clearing Copy Jams
If CLEARCOPYappears in the display, there is a copy jam. .
CAUTION: Do not touch the fusing unit (see the diagram below). It may be hot.
CAUTION: Do not touch the photoconductor drum (green drum).
CAUTION: Any toner on the paper will not be fixed to the paper. Be careful not to get your hands or clothing dirty.
CAUTION: Even if you can see the paper from the exit, do not pull it without opening the cover.
1Squeeze in the release button on the left side of the machine and
open the cover.
2Carefully pull out the jammed pa- per from the outside of the ma-
chine. Do not leave any pieces inside.
If the document is very short you |
|
might not be able to see it. In this |
|
case remove the toner cassette |
|
and photoconductor following |
|
steps 2 to 5 on the page 52. Then | Fusing Unit (white grill) |
remove the jammed paper and re- |
|
install the photoconductor and |
|
toner cassette. |
|
3 Close the cover firmly and pull the copy tray forward.
56