INSTALLATION | Setting the Paper Size | |
5 | Slide the draw until the paper just | |
| ||
| touches the front and back of the |
|
| draw rightly. |
|
| Then press the button on the left |
|
| of the cassette to raise the metal |
|
| plate. |
|
| Make sure that the |
|
| shaped roller has its curved edge |
|
| on top. |
|
6 | Place the machine onto the paper |
|
| feed unit. |
|
Warning: Watch your fingers!
Note: If any foreign matter (especially glue) is on the copy paper, print quality may deteriorate. Make sure the front, back and sides of the copy paper are completely clean.PAPERSIZE Y/jk
Use the following procedure to select which paper A4size the machine will use for the printouts. For example if you wish to use Legal size paper, install the Legal jsize paper into the feed. After done that, choose "LEGAL" using Function 34 or
key.
1 | Press the Function key and 3, 4, |
|
|
| using the ten keypad, then press |
|
|
| the Yes key. | PAPERSIZE | Y/jk |
| Or | ||
| Press the jkey. | ||
| Current paper size appear in the | ||
| LEGAL(8.5X14INCH) | ||
2 display. Scroll the paper size us- |
ing the kkey then press Yes.