Samsung CLP-775 SERIES Getting started, Setting up the hardware, Supplied software, Contents

Page 22

getting started

This chapter gives you step-by-step instructions for setting up the USB connected machine and software.

This chapter includes:

Setting up the hardware

Supplied software

Setting up the hardware

This section shows the steps to set up the hardware, as is explained in the Quick Install Guide. Make sure you read the Quick Install Guide first and follow the steps below:

1.Select a stable location.

Select a level, stable place with adequate space for air circulation. Allow extra space to open covers and trays.

The area should be well ventilated and away from direct sunlight or sources of heat, cold, and humidity. Do not set the machine close to the edge of your desk or table.

Printing is suitable for altitudes under 1,000 m (3,281 ft). Refer to the altitude setting to optimize your printing. (See "Altitude adjustment" on page 40.)

Place the machine on a flat, stable surface so that there is no incline greater than 2 mm (0.08 inch). Otherwise, printing quality may be affected.

2.Unpack the machine and check all the enclosed items.

3.Remove tape holding the machine securely.

4.Install the toner cartridge.

5.Load paper. (See "Loading paper in the tray" on page 43.)

6.Make sure that all cables are connected to the machine.

7.Turn the machine on.

System requirements

Installing the driver locally

This equipment will be inoperable when mains power fails.

Supplied software

After you have set up your machine and connected it to your computer, you must install the printer software. If you are a Windows or Macintosh OS, install the software from the supplied CD and if you are a Linux OS user or UNIX OS user, download the software from the Samsung website (www.samsung.com/printer) and install.

Machine software are occasionally updated due to release of new operating system and etc. If needed, download the latest version from the Samsung website. (www.samsung.com/printer)

OS

 

Contents

 

 

 

Windows

Printer driver: Use this driver to take full advantage

 

 

of your machine’s features.

 

PostScript printer driver: Use the PostScript driver

 

 

to print documents with complex fonts and graphics

 

 

in the PS language. (PostScript printer description

 

 

file is included.)

 

Samsung Easy Printer Manager: Samsung Easy

 

 

Printer Manager combines device settings as well as

 

 

printing environments, settings/actions and

 

 

launching. All of these features provide a gateway to

 

 

conveniently use your Samsung machine.

 

Samsung Printing Status: This program allows

 

 

you to monitor the machine’s status and alerts you

 

 

when an error occurs during printing.

 

Direct Printing Utility: This program allows you to

 

 

print PDF files directly.

 

SetIP: Use this program to set your machine’s

 

 

TCP/IP addresses.

 

 

 

Macintosh

PostScript printer driver: Use this driver to run

 

 

your machine from a Macintosh computer and print

 

 

documents. (PostScript printer description file is

 

 

included.)

 

Smart Panel: This program allows you to monitor

 

 

the machine’s status and alerts you when an error

 

 

occurs during printing.

 

SetIP: Use this program to set your machine’s

 

 

TCP/IP addresses.

 

 

 

Getting started_ 22

Image 22
Contents Color Laser Printer Copyright CopyrightSafety information Safety informationImportant safety symbols Operating environmentOperating method Installation / Moving Maintenance / Checking Supply usageRegulatory information Laser safety statementOzone safety Regulatory informationRecycling Power saverUnited States of America only Rfid Radio Frequenty Interface Device Correct disposal of batteries in this productRadio Frequency Emissions FCC Information to the UserRegulatory information Approvals and Certifications Declaration of Conformity European CountriesImportant warning Green and Yellow EarthRegulatory Compliance Statements Wireless GuidanceIsrael only China only About this user’s guide About this user’s guideConvention Convention Description ExampleFinding more information Material name DescriptionSpecial Features Features of your new productFeatures of your new product Features by Model Features CLP-775 SeriesFront view IntroductionMachine overview IntroductionRear view Control panel overview Status LED Understanding the control panelTurning on the machine ButtonsGetting started Setting up the hardwareContents Supplied softwareInstalling the driver locally System requirementsSelect Uninstall and click Uninstall Installing the Linux Unified DriverOpen the Applications folder Utilities Print Setup Utility WindowsDouble click cdroot Linux smartpanel install.sh Installing the SmartPanelInstalling the Printer Settings Utility Double click cdroot Linux psu install.shNetwork environment Network setupUsing a wired network Introducing useful network programsIPv4 configuration using SetIP Windows Setting IP addressIP setting using control panel IPv4 configuration using SetIP MacintoshInstalling wired network connected machine’s driver Network parameter settingRestoring factory default settings Restoring factory default settings using control panelSetup.exe /s /L18 Command Definition Description LineIn-Setup.exe /s L0x0012 orPrinters and Faxes folder MacintoshOpens Printers Code LanguageLinux InstallAccept printername enable printername Gzip -d package name tar xfUsing the Wlan Wireless network setupChoosing the installation type Setup using WindowsSelect the Wireless Setting and Installation option Wireless Network Setting Complete window appearsFor the Dhcp method Ad hoc via USB cableFor the Static method Items to prepare Setup using MacintoshClick Continue Click Wireless Setting and Installation Creating the ad hoc network in MacintoshUsing a network cable Turning the Wi-Fi network on/offOther problems TroubleshootingProblems during setup or driver installation Click Wireless CustomSetting IPv6 addresses IPv6 configurationUsing IPv6 Connecting SyncThru Web ServiceBasic setup Changing font setting Using power saving featureSetting the default tray and paper Control panelSelecting print media Media sizes supported in duplex modeMedia and tray Changing the tray sizeTray 1 / optional trays Paper limit mark Paper level indicatorLoading paper in the tray Paper width guideTips on using the multi-purpose tray Multi-purpose trayTransparency Printing on special mediaEnvelope Types Tray Optional Multi-purpose TraysLetterhead / Preprinted paper LabelsCard stock/ Custom-sized paper Used paperPhoto Setting the paper size and typeUsing the output support GlossyBasic printing Canceling a print jobPrinting PrintingUsing advanced print features Changing the default print settingsSetting your machine as a default machine Using helpUnderstanding special printer features Overlay window appears Edit Overlay window, click Create OverlayOverlay List What is Direct Printing Utility? Using Direct Printing Utility Windows onlyPrint Mode Macintosh printing Linux printingUnix printing Configuring Printer PropertiesChanging the machine settings Printing filesHPGL/2 tab Printer-Specific Settings tabText tab Margins tabMachine status and advanced features Machine status and advanced featuresAccessing the Menu InformationPaper System SetupGraphic Color EmulationNetwork Job Management Management tools Using SyncThru Web ServiceSamsung AnyWeb Print Setting the system administrator’s information Using Samsung Easy Printer Manager Windows onlyUnderstanding Samsung Easy Printer Manager Advanced settings user interface overview Using Samsung Printer Status Windows onlyUsing Smart Panel Macintosh and Linux only Samsung Printer Status overviewOpening the Unified Driver Configurator Using the Unified Linux Driver ConfiguratorChanging Smart Panel ‘s settings Printers configurationSwitches to Ports configuration Ports configurationClasses Tab Maintenance Maintenance Handling instructions Storing the Toner cartridgeTips for Moving & storing your machine Use of non-Samsung and refilled toner cartridgeTroubleshooting TroubleshootingRedistributing toner Tips for avoiding paper jams Clearing paper jamsTray Optional traysFuser unit area Click this link to open an animation about clearing a jamExit area Duplex unit areaUnderstanding display messages Checking display messagesMessage Meaning Suggested solutions Change room Temperature Error aaa Fuser unit is not Installed Install it Jam bottomTemperature Call for servicePaper feeding problems Solving other problemsCondition Suggested solutions Printing problems Condition Possible cause Suggested solutionsPrinting quality problems Vertical lines DropoutsWhite Spots Color or BlackCondition Common Linux problems Common PostScript problemsCommon Windows problems Problem Possible cause SolutionCommon Macintosh problems Available accessories Supplies and accessoriesHow to purchase Supplies and accessoriesReplacing the toner cartridge Available maintenance partsConnector Interface IEEE1284 Parallel Allows you to use variousReplacing the paper transfer belt Necessary Precautions to take when installing accessories Installing a memory module Activating the added accessories in printer propertiesInstalling a wireless network interface card Installing a wireless network interface cardPrinting with the optional hard disk Installing a hard diskInstalling a hard disk Storing a jobForm file Printing or deleting a stored jobControlling the active job queue File PolicySupplies and accessories Specifications SpecificationsGeneral specifications This chapter includeMinimum size custom Print media specificationsMaximum size custom Contact Samsung worldwide Contact samsung worldwideCountry/Region Customer Care Center Web Site Guatemala Honduras Philippines Glossary Duplex DMPrDot Matrix Printer Duty CycleIntranet ITU-T No chartIeee IP addressNetWare ResolutionModem OriginalsUNC Path Subnet MaskToner Cartridge WatermarkXPS