Samsung CLP-775 SERIES Network setup, Network environment, Introducing useful network programs

Page 26

network setup

This chapter gives you step-by-step instructions for setting up the network connected machine and software.

This chapter includes:

•Network environment

•Introducing useful network programs

•Using a wired network

•If you are using wired network environment, see "Using a wired network" on page 26.

•If you are using wireless network environment, see "Wireless network setup" on page 32.

Network environment

You need to set up the network protocols on the machine to use it as your network machine. You can set up the basic network settings through the machine's control panel.

The following table shows the network environments supported by the machine:

Item

 

Requirements

 

 

 

Network interface

•

Ethernet 10/100/1000 Base-TX

 

• 802.11 b/g/n Wireless LAN (Optional)

 

 

 

Network operating system

•

Windows

 

 

2000/XP/2003/2008/Vista/7/2008

 

 

Server R2

 

•

Various Linux OS

 

• Mac OS X 10.3 ~ 10.6

 

•

UNIX

 

 

 

Network protocols

•

TCP/IPv4

 

•

DHCP, BOOTP

 

• DNS, WINS, Bonjour, SLP, UPnP

 

• Standard TCP/IP Printing(RAW), LPR,

 

 

IPP

 

• SNMPv 1/2/3, HTTP(S), Telnet, SMTP,

 

 

IPSec

 

• TCP/IPv6 (DHCP, DNS, RAW, LPR,

 

 

SNMPv 1/2/3, HTTP(S), IPSec

 

 

(See "IPv6 configuration" on page 39.)

 

 

 

Wireless Security

•

Authentication : Open System, Shared

 

 

Key, WPA Personal, WPA2 Personal

 

 

(PSK), WPA Enterprise, WPA2

 

 

Enterprise

 

•

Encryption : WEP64, WEP128, TKIP,

 

 

AES

 

 

 

•Wireless network setup

•IPv6 configuration

Introducing useful network programs

There are several programs available to setup the network settings easily in network environment. For the network administrator especially, managing several machines on the network is possible.

Before using the programs below, set the IP adress first.

SyncThru™ Web Service

Web server embedded on your network machine, which allows you to:

•Configure the network parameters necessary for the machine to connect to various network environments.

•Customize machine settings.

(See "Using SyncThru™ Web Service" on page 60.)

SyncThru™ Web Admin Service

Web-based machine management solution for network administrators. SyncThru™ Web Admin Service provides you with an efficient way of managing network devices and lets you remotely monitor and troubleshoot network machines from any site with corporate internet access. Download this program from http://solution.samsungprinter.com.

SetIP

This utility program allows you to select a network interface and manually configure the IP addresses for use with the TCP/IP protocol. (See "Setting IP address" on page 27)

TCP/IPv6 is not supported by this program.

Using a wired network

You must set up the network protocols on your machine to use it on your network. This chapter will show you how this is easily accomplished.

You can use network after connecting network cable to a corresponding port on your machine.

Printing Network Configuration report

You can print a Network Configuration Report from the machine’s control panel that will show the current machine’s network settings. This will help you to set up a network and troubleshooting problems.

Network setup_ 26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Color Laser Printer Copyright CopyrightSafety information Safety informationImportant safety symbols Operating environmentOperating method Installation / Moving Maintenance / Checking Supply usageRegulatory information Laser safety statementOzone safety Regulatory informationUnited States of America only Power saverRecycling Rfid Radio Frequenty Interface Device Correct disposal of batteries in this productRadio Frequency Emissions FCC Information to the UserRegulatory information Approvals and Certifications Declaration of Conformity European CountriesImportant warning Green and Yellow EarthIsrael only Wireless GuidanceRegulatory Compliance Statements China only About this user’s guide About this user’s guideConvention Convention Description ExampleFinding more information Material name DescriptionFeatures of your new product Features of your new productSpecial Features Features by Model Features CLP-775 SeriesFront view IntroductionMachine overview IntroductionRear view Control panel overview Status LED Understanding the control panelTurning on the machine ButtonsGetting started Setting up the hardwareContents Supplied softwareInstalling the driver locally System requirementsSelect Uninstall and click Uninstall Installing the Linux Unified DriverOpen the Applications folder Utilities Print Setup Utility WindowsDouble click cdroot Linux smartpanel install.sh Installing the SmartPanelInstalling the Printer Settings Utility Double click cdroot Linux psu install.shNetwork environment Network setupUsing a wired network Introducing useful network programsIPv4 configuration using SetIP Windows Setting IP addressIP setting using control panel IPv4 configuration using SetIP MacintoshInstalling wired network connected machine’s driver Network parameter settingRestoring factory default settings Restoring factory default settings using control panelSetup.exe /s /L18 Command Definition Description LineIn-Setup.exe /s L0x0012 orPrinters and Faxes folder MacintoshOpens Printers Code LanguageLinux InstallAccept printername enable printername Gzip -d package name tar xfUsing the Wlan Wireless network setupChoosing the installation type Setup using WindowsSelect the Wireless Setting and Installation option Wireless Network Setting Complete window appearsFor the Static method Ad hoc via USB cableFor the Dhcp method Click Continue Setup using MacintoshItems to prepare Click Wireless Setting and Installation Creating the ad hoc network in MacintoshUsing a network cable Turning the Wi-Fi network on/offOther problems TroubleshootingProblems during setup or driver installation Click Wireless CustomSetting IPv6 addresses IPv6 configurationUsing IPv6 Connecting SyncThru Web ServiceBasic setup Changing font setting Using power saving featureSetting the default tray and paper Control panelSelecting print media Media sizes supported in duplex modeMedia and tray Changing the tray sizeTray 1 / optional trays Paper limit mark Paper level indicatorLoading paper in the tray Paper width guideTips on using the multi-purpose tray Multi-purpose trayTransparency Printing on special mediaEnvelope Types Tray Optional Multi-purpose TraysLetterhead / Preprinted paper LabelsCard stock/ Custom-sized paper Used paperPhoto Setting the paper size and typeUsing the output support GlossyBasic printing Canceling a print jobPrinting PrintingUsing advanced print features Changing the default print settingsSetting your machine as a default machine Using helpUnderstanding special printer features Overlay List OverlayOverlay window appears Edit Overlay window, click Create Print Mode Using Direct Printing Utility Windows onlyWhat is Direct Printing Utility? Macintosh printing Linux printingUnix printing Configuring Printer PropertiesChanging the machine settings Printing filesHPGL/2 tab Printer-Specific Settings tabText tab Margins tabMachine status and advanced features Machine status and advanced featuresAccessing the Menu InformationGraphic System SetupPaper Network EmulationColor Job Management Samsung AnyWeb Print Using SyncThru Web ServiceManagement tools Understanding Samsung Easy Printer Manager Using Samsung Easy Printer Manager Windows onlySetting the system administrator’s information Advanced settings user interface overview Using Samsung Printer Status Windows onlyUsing Smart Panel Macintosh and Linux only Samsung Printer Status overviewOpening the Unified Driver Configurator Using the Unified Linux Driver ConfiguratorChanging Smart Panel ‘s settings Printers configurationClasses Tab Ports configurationSwitches to Ports configuration Maintenance Maintenance Handling instructions Storing the Toner cartridgeTips for Moving & storing your machine Use of non-Samsung and refilled toner cartridgeRedistributing toner TroubleshootingTroubleshooting Tips for avoiding paper jams Clearing paper jamsTray Optional traysFuser unit area Click this link to open an animation about clearing a jamExit area Duplex unit areaUnderstanding display messages Checking display messagesMessage Meaning Suggested solutions Change room Temperature Error aaa Fuser unit is not Installed Install it Jam bottomTemperature Call for serviceCondition Suggested solutions Solving other problemsPaper feeding problems Printing problems Condition Possible cause Suggested solutionsPrinting quality problems Vertical lines DropoutsWhite Spots Color or BlackCondition Common Linux problems Common PostScript problemsCommon Windows problems Problem Possible cause SolutionCommon Macintosh problems Available accessories Supplies and accessoriesHow to purchase Supplies and accessoriesReplacing the toner cartridge Available maintenance partsConnector Interface IEEE1284 Parallel Allows you to use variousReplacing the paper transfer belt Necessary Precautions to take when installing accessories Installing a memory module Activating the added accessories in printer propertiesInstalling a wireless network interface card Installing a wireless network interface cardPrinting with the optional hard disk Installing a hard diskInstalling a hard disk Storing a jobForm file Printing or deleting a stored jobControlling the active job queue File PolicySupplies and accessories Specifications SpecificationsGeneral specifications This chapter includeMaximum size custom Print media specificationsMinimum size custom Country/Region Customer Care Center Web Site Contact samsung worldwideContact Samsung worldwide Guatemala Honduras Philippines Glossary Duplex DMPrDot Matrix Printer Duty CycleIntranet ITU-T No chartIeee IP addressNetWare ResolutionModem OriginalsUNC Path Subnet MaskToner Cartridge WatermarkXPS
Top Page Image Contents