Samsung CLP-775 SERIES, CLP775ND manual Available maintenance parts, Replacing the toner cartridge

Page 84

Accessory

function

Part name

 

 

 

IEEE1284 Parallel

Allows you to use various

ML-PAR100

Connector

interface.

 

•When installing the printer driver with an IEEE1284 parallel connector, the machine might not be found and after installing the printer driver, only basic printing features are available.

•If you want to check the machine's status or set the settings, connect the machine to a computer with a USB cable or a network.

•If you use the IEEE 1284 parallel connector, you can not use the USB cable.

a.Depending on your country, wireless LAN cards may not be available. Contact your local Samsung dealer or the retailer where you bought your printer.

Available maintenance parts

To avoid print quality and paper feed problems resulting from worn parts and to maintain your machine in top working condition, the following parts will need to be replaced after printing the specified number of pages or when the life span of each item has expired.

Parts

Average yielda

Fuser unit

Approx. 100,000 pages

 

 

Pickup roller (FCF)

B4 Approx. 100,000 pages

 

 

Pickup roller (MP)

Approx. 100,000 pages

 

 

Pickup roller (SCF)

Approx. 200,000 pages

 

 

Forward (SCF)

Approx. 200,000 pages

 

 

Retard (FCF)

B4 Approx. 100,000 pages

 

 

Friction (MP)

Approx. 100,000 pages

 

 

Retard (SCF)

Approx. 100,000 pages

 

 

Dust cleaning kit

Approx. 100,000 pages

 

 

a.It will be affected by operating system used, computing performance, application software, connecting method, media type, media size and job complexity.

To purchase maintenance parts, contact the source where you bought the machine.

Replacing maintenance parts can be performed only by an authorized service provider, dealer, or the retailer where you bought the machine. The warranty does not cover the replacement of any maintenance parts after their lifespan.

Replacing the toner cartridge

Click this link to open an animation about replacing a toner cartridge.

The machine uses four colors and has a different print cartridge for each one: yellow (Y), magenta (M), cyan (C), and black (K).

•The status LED and the toner-related message on the display indicate when each individual print cartridge should be replaced.

At this stage, the toner cartridge needs to be replaced. Check the type of the toner cartridge for your machine. (See "Available supplies" on page 83.)

1.Using the handle, completely open the front cover.

•Do not touch the green surface, the OPC drum or the front of

the print cartridge, with your hands or any other material. Use the handle on each cartridge in order to avoid touching this area.

•Be careful not to scratch the surface of the paper transfer belt.

•If you leave the front cover open for more than a few minutes, the OPC drum can be exposed to light. This will cause damage to the OPC drum. Close the front cover when the installation need to be halted for any reason.

2.Press the green release handle to release the paper transfer belt. Holding the handle on the paper transfer belt, lift it out of the machine.

Supplies and accessories_ 84

Page 83 Page 85
Image 84
Page 83 Page 85
Contents Color Laser Printer Copyright CopyrightSafety information Important safety symbolsSafety information Operating environmentOperating method Installation / Moving Maintenance / Checking Supply usageLaser safety statement Ozone safetyRegulatory information Regulatory informationPower saver RecyclingUnited States of America only Correct disposal of batteries in this product Radio Frequency EmissionsRfid Radio Frequenty Interface Device FCC Information to the UserRegulatory information Declaration of Conformity European Countries Important warningApprovals and Certifications Green and Yellow EarthWireless Guidance Regulatory Compliance StatementsIsrael only China only About this user’s guide ConventionAbout this user’s guide Convention Description ExampleFinding more information Material name DescriptionFeatures of your new product Special FeaturesFeatures of your new product Features by Model Features CLP-775 SeriesIntroduction Machine overviewFront view IntroductionRear view Control panel overview Understanding the control panel Turning on the machineStatus LED ButtonsSetting up the hardware ContentsGetting started Supplied softwareInstalling the driver locally System requirementsInstalling the Linux Unified Driver Open the Applications folder Utilities Print Setup UtilitySelect Uninstall and click Uninstall WindowsInstalling the SmartPanel Installing the Printer Settings UtilityDouble click cdroot Linux smartpanel install.sh Double click cdroot Linux psu install.shNetwork setup Using a wired networkNetwork environment Introducing useful network programsSetting IP address IP setting using control panelIPv4 configuration using SetIP Windows IPv4 configuration using SetIP MacintoshNetwork parameter setting Restoring factory default settingsInstalling wired network connected machine’s driver Restoring factory default settings using control panelCommand Definition Description Line In-Setup.exe /sSetup.exe /s /L18 L0x0012 orMacintosh Opens PrintersPrinters and Faxes folder Code LanguageInstall Accept printername enable printernameLinux Gzip -d package name tar xfWireless network setup Choosing the installation typeUsing the Wlan Setup using WindowsSelect the Wireless Setting and Installation option Wireless Network Setting Complete window appearsAd hoc via USB cable For the Dhcp methodFor the Static method Setup using Macintosh Items to prepareClick Continue Click Wireless Setting and Installation Creating the ad hoc network in MacintoshUsing a network cable Turning the Wi-Fi network on/offTroubleshooting Problems during setup or driver installationOther problems Click Wireless CustomIPv6 configuration Using IPv6Setting IPv6 addresses Connecting SyncThru Web ServiceBasic setup Using power saving feature Setting the default tray and paperChanging font setting Control panelMedia sizes supported in duplex mode Media and traySelecting print media Changing the tray sizePaper limit mark Paper level indicator Loading paper in the trayTray 1 / optional trays Paper width guideTips on using the multi-purpose tray Multi-purpose trayPrinting on special media EnvelopeTransparency Types Tray Optional Multi-purpose TraysLabels Card stock/ Custom-sized paperLetterhead / Preprinted paper Used paperSetting the paper size and type Using the output supportPhoto GlossyCanceling a print job PrintingBasic printing PrintingChanging the default print settings Setting your machine as a default machineUsing advanced print features Using helpUnderstanding special printer features Overlay Overlay window appears Edit Overlay window, click CreateOverlay List Using Direct Printing Utility Windows only What is Direct Printing Utility?Print Mode Macintosh printing Linux printingConfiguring Printer Properties Changing the machine settingsUnix printing Printing filesPrinter-Specific Settings tab Text tabHPGL/2 tab Margins tabMachine status and advanced features Accessing the MenuMachine status and advanced features InformationSystem Setup PaperGraphic Emulation ColorNetwork Job Management Using SyncThru Web Service Management toolsSamsung AnyWeb Print Using Samsung Easy Printer Manager Windows only Setting the system administrator’s informationUnderstanding Samsung Easy Printer Manager Using Samsung Printer Status Windows only Using Smart Panel Macintosh and Linux onlyAdvanced settings user interface overview Samsung Printer Status overviewUsing the Unified Linux Driver Configurator Changing Smart Panel ‘s settingsOpening the Unified Driver Configurator Printers configurationPorts configuration Switches to Ports configurationClasses Tab Maintenance Maintenance Storing the Toner cartridge Tips for Moving & storing your machineHandling instructions Use of non-Samsung and refilled toner cartridgeTroubleshooting TroubleshootingRedistributing toner Tips for avoiding paper jams Clearing paper jamsTray Optional traysFuser unit area Click this link to open an animation about clearing a jamExit area Duplex unit areaUnderstanding display messages Checking display messagesMessage Meaning Suggested solutions Fuser unit is not Installed Install it Jam bottom TemperatureChange room Temperature Error aaa Call for serviceSolving other problems Paper feeding problemsCondition Suggested solutions Printing problems Condition Possible cause Suggested solutionsPrinting quality problems Dropouts White SpotsVertical lines Color or BlackCondition Common PostScript problems Common Windows problemsCommon Linux problems Problem Possible cause SolutionCommon Macintosh problems Supplies and accessories How to purchaseAvailable accessories Supplies and accessoriesAvailable maintenance parts Connector InterfaceReplacing the toner cartridge IEEE1284 Parallel Allows you to use variousReplacing the paper transfer belt Necessary Precautions to take when installing accessories Activating the added accessories in printer properties Installing a wireless network interface cardInstalling a memory module Installing a wireless network interface cardInstalling a hard disk Installing a hard diskPrinting with the optional hard disk Storing a jobPrinting or deleting a stored job Controlling the active job queueForm file File PolicySupplies and accessories Specifications General specificationsSpecifications This chapter includePrint media specifications Minimum size customMaximum size custom Contact samsung worldwide Contact Samsung worldwideCountry/Region Customer Care Center Web Site Guatemala Honduras Philippines Glossary DMPr Dot Matrix PrinterDuplex Duty CycleITU-T No chart IeeeIntranet IP addressResolution ModemNetWare OriginalsSubnet Mask Toner CartridgeUNC Path WatermarkXPS
Top Page Image Contents