Be care when replacing paper or removing jammed paper.
►New paper has sharp edges and can cause painful cuts.
This machine's power interception device is the power cord.
►To switch off the power supply, remove the power cord from the electrical outlet.
Installation / Moving
Warning
Do not place the machine in an area with dust, humidity or water leaks.
► This could result in electric shock or fire.
Caution
Before moving the machine, turn the power off and disconnect all cords.
Then lift the machine:
•If the machine weighs under 20 kg (44.09lbs), lift with 1 person.
•If the machine weighs 20 kg (44.09lbs) - 40kg (88.18lbslbs), lift with 2 people.
•If the machine weighs more than 40 kg (88.18lbs), lift with 4 or more people.
►The machine could fall, causing injury or machine damage.
Do not place the machine on an unstable surface.
►The machine could fall, causing injury or machine damage.
The machine should be connected to
the power level which is specified on the label.
►If you are unsure and want to check the power level you are using, contact the electrical utility company.
Use only No.26 AWGa or larger, telephone line cord, if necessary.
►Otherwise, it can cause damage to the machine.
a. AWG: American Wire Gauge
Do not put a cover over the machine or place it in an airtight location, such as a closet.
►If the machine is not
Make sure you plug the power cord into a grounded electrical outlet.
►Otherwise, this could result in electric shock or fire.
Do not overload wall outlets and extension cords.
►This can diminish performance, and could result in electric shock or fire.
Use the power cord supplied with your machine for safe operation. If you are using a cord which is longer than 2 meters (6 feet) with a 140V machine, then the gauge should be 16 AWG or larger.
►Otherwise, it can cause damage to the machine, and could result in electric shock or fire.