media and tray
This chapter provides information on how to load print media into your machine.
This chapter includes: |
|
| |
• | Selecting print media | • Printing on special media | |
• Changing the tray size | • | Setting the paper size and type | |
• | Loading paper in the tray | • | Using the output support |
Selecting print media
You can print on a variety of print media, such as plain paper, envelopes, labels, and transparencies. Always use print media that meet the guidelines for use with your machine.
Guidelines to select the print media
Print media that does not meet the guidelines outlined in this user’s guide may cause the following problems:
•Poor print quality
•Increased paper jams
•Premature wear on the machine.
Properties, such as weight, composition, grain, and moisture content, are important factors that affect the machine’s performance and the output quality. When you choose print materials, consider the following:
•The type, size and weight of the print media for your machine are described in print media specifications. (See "Print media specifications" on page 92.)
•Desired outcome: The print media you choose should be appropriate for your project.
•Brightness: Some print media are whiter than others and produce sharper, more vibrant images.
•Surface smoothness: The smoothness of the print media affects how crisp the printing looks on the paper.
•Some print media may meet all of the guidelines in this section and still not produce satisfactory results. This may be the result of improper handling, unacceptable temperature and humidity levels, or other variables over which cannot be controlled.
•Before purchasing large quantities of print media, ensure that it meets the requirements specifications in this user’s guide and meets your output requirements.
•Using print media that does not meet these specifications may
cause problems, requiring repairs. Such repairs are not covered by the warranty or service agreements.
•Using inflammable print media can cause a fire.
•Use designated print media (See "Print media specifications" on page 92).
The use of inflammable media or foreign materials left in the printer may lead to overheating of the unit and, in rare cases may cause a fire.
The amount of paper put into the tray may differ according to media type used. (See "Print media specifications" on page 92.)
Media sizes supported in duplex mode
Mode | Size | Type |
| Source |
|
|
|
|
|
Duplex | Letter, A4, | Plain, Color, | • | tray 1 |
printinga | Legal, US Folio, | Preprinted, | • | optional trays |
| Oficio | Recycled, | • | |
|
| Thickb, Thinc | ||
|
|
|
| |
a. 60 to 120 g/m2 (16~32 lb bond) only. |
|
| ||
b. If media weight is 120 g/m2 (32 lb bond), load a paper into the
c. If media weight is 60 g/m2 (16 lb bond), select the Thin type.
Changing the tray size
The tray is preset to Letter or A4 size, depending on your country. To change the size, you need to adjust the paper guides.
1.Push the back plate of the tray outwards completely so that it can extend the length of the tray.
2.Squeeze the paper length guide and slide it to the correct position for the paper size you are loading, which is marked at the bottom of the tray.
1 Paper length guide