Siemens RDG400 manual Parameters Service level

4.12.1Parameters Service level

Parameter	Name	Factory setting		Range
						RDG400
	Service level
P01	Control sequence	When 2-pipe /		0	= Heating only
		2-stage:		1	= Cooling only
		1	= Cooling only	2	= H/C changeover manual
		When 4-pipe:		3	= H/C changeover auto
		4	= H and C	4	= Heating and Cooling
P02	User operating mode profile (mode button)	1		1	= (Auto) - Comfort - Protection
				2	= (Auto) - Comfort - E Saving - Prot
P04	Selection of °C or °F	0	(°C)	0	= Degrees Celsius (°C)
				1	= Degrees Fahrenheit (°F)
P05	Sensor calibration (intern, extern)	0	K	– 3 ... 3 K
P06	Standard temperature display	0		0	= Room Temperature
				1	= Setpoint
P07	Display info line	0		0	= --- (No display)	0..1
	(2nd line of LCD)			1	= °C and °F
P08	Comfort setpoint	21 °C		5	... 40 °C
P09	Minimum setpoint in Comfort mode	5	°C	5	... 40 °C
P10	Maximum setpoint in Comfort mode	35 °C		5	... 40 °C
P11	Energy Saving heating setpoint	15 °C		OFF, 5 ... WcoolE-saving;
				(WcoolE-saving = 40 °C max)
P12	Energy Saving cooling setpoint	30 °C		OFF, WHeatE-saving ... 40 °C;
				(WHeatE-saving = 5 °C min)
P14	Button lock function	0		0	= Unlocked
				1	= Auto locked
				2	= Manual locked

Note Parameter display depends on selected application and function

		29 / 42
Siemens	RDG100, RDG100T, RDG110, RDG140, RDG160 Basic Documentation	CE1P3182en
Building Technologies	Functions	28 May 2009