5.2Operation
See also the operating instructions B3181 enclosed with the thermostat.
Layout
|
|
| 2 |
|
| 1 | 3 |
| 1 |
| Operating mode button / Esc |
| 2 |
| Protection mode and OK |
| 3 |
| Rotary knob for setpoint and parameter adjustment |
Button operation | • | When the thermostat is in normal operation, the actual operating mode and | |
status is indicated by symbols.
• When a button is pressed, the RDG goes into the Mode selection
The LCD backlight will turn on, all possible mode selection options (symbols) will turn on, indicator element (arrow) will appear on the current mode/status.
• When the button is pressed again, the indicator element will toggle to the next mode symbol and so on.
• After the last press and a timeout of 3 sec, the new selected mode is confirmed, the other elements disappear.
• After a timeout of 20 sec the LCD backlight will turn off
User action
Press left button
Press left button >3 sec
Remain on left button and turn rotary knob clockwise
Remain on left button and turn rotary knob
Press left button while "Operating mode
Press right button >3 sec
Press right button
Rotate rotary knob
Press left + right button >3sec, release, then press right button >3sec
Press left button + right button 3sec, release, press left button 3sec,
then rotate rotary knob
Effect, description
Go into Operating mode selection Set thermostat to Protection mode Activate temporary timer "Extend presence" and set the time (details see page 16) Activate temporary timer " Extend absence" and set the time (details see page 16) Activate " Extend Comfort mode"
(details see page 16) Activate/deactivate button lock Change to protection mode and back Adjust the room temperature setpoint Go into parameter mode Service level
Go into parameter mode Expert level, diagnostics & test
|
| 33 / 42 |
|
|
|
Siemens | RDG100, RDG100T, RDG110, RDG140, RDG160 Basic Documentation | CE1P3182en |
Building Technologies | Handling | 28 May 2009 |