Sanus Systems VMF308 manual Wall Mounting

3

CAUTION:

Wall Mounting

3-1: Wood Stud Mounting

CAUTION: Improper use could reduce the holding power of the lag bolt. To avoid potential injuries or property damage:

Pilot holes MUST be drilled to a depth of 75 mm (3 in.), using a 5.5 mm (7/32 in.) diameter drill bit.

DO NOT over-tighten the lag bolts [32].

Any material covering the wall must not exceed 16 mm (5/8 in.).

Minimum wood stud size: common 2 x 4 in. (nominal 1.5 x 3.5 in.)

3-2: Solid Concrete and Concrete Block Mounting

CAUTION: Improper use could reduce the holding power of the lag bolt. To avoid potential injuries or property damage:

Pilot holes MUST be drilled to a depth of 75 mm (3 in.), using a 10 mm (3/8 in.) diameter drill bit.

Be sure the anchors [30] seat flush with the concrete surface.

Mount wall plate directly onto the concrete surface.

Never drill into the mortar between blocks.

DO NOT over-tighten the lag bolts [32].

Minimum solid concrete thickness: 8 in.

Minimum concrete block size: 8 x 8 x 16 in.

16 6901-002066<02>