? | 4 |
|
Install wall plate covers and the wire management assembly (optional) onto the wall plate.
1.Mount the upper cover [05] using the 1⁄8 in. hex key [23] to install four screws [27].
2.Mount the lower cover [05] using the 1⁄8 in. hex key [23] to install four screws [27] while (optional) fitting the rear mount of the wire managment assembly [04] between the cover [05] and the lower horizontal of the wall plate [02].
Note: Do not install the rear mount of the wire management assembly
[04]unless you intend to install the front mount of the wire management assembly [04] in Step 6.
| [05] |
[27] |
|
4 | [23] |
[27]
4
[02]
[05]
[04]
? | [23] | [27] |
|
[04] | [05] |
|
| 19 |