Sanyo srt-6000 instruction manual Changing the ON-SCREEN Display, Selecting the On-screen Display

Page 11

CHANGING THE ON-SCREEN DISPLAY

Selecting the On-screen Display

You can select to display or not the date, time, the number of alarm recordings and tape speed.

1Turn the power on to all devices used.

2Press the MENU button until the (SET UP 2) menu is displayed.

@@@@@@@<SET@UP@2>

öDISPLAY

@@@DATE@@@@@@@@@@@Y

@@@TIME@@@@@@@@@@@Y

@@@ALARM@COUNT@@@@Y

@@@SPEED@@@@@@@@@@Y

öBUZZER

@@@ALARM@IN@@@@@@@Y

@@@TAPE@END@@@@@@@Y

@@@KEY@IN@@@@@@@@@N

@@@WARNING@@@@@@@@Y

3Turn the JOG dial clockwise, until the desired item for which the display function will be set is flashing.

4Turn the SHUTTLE ring to set “Y” for the functions described below.

DATE . . . . . . . . . . . . The date is displayed

TIME . . . . . . . . . . . . The time is displayed

ALARM COUNT. . . . The number of alarm recordings is displayed

SPEED. . . . . . . . . . . The recording/playback speed mode is displayed

5Press the SEARCH button to save the settings.

øThe setting procedure is now completed.

Changing the Date/Time Display Position

1Turn the power on to all input devices to the VCR.

2Set the ON SCREEN switch to the “ON” position.

øThe date and time are displayed.

10-15-99@FRI@000 15:20:00@@@8

3Press the SHIFT « (or ]) button.

øThe display will move towards the right (or the bottom).

NOTES:

œIf the SHIFT « (or ]) button is kept pressed for 1 second or more the display will move at a faster speed.

œThe display position cannot be changed while recording.

NOTE:

œIf the ON SCREEN switch is set to the “ON” position, the items for which “Y” is set are recorded. The items for which “N” was set at step 4 above are not recorded.

10

English

Image 11

Contents SRT-6000 Precautions Contents FeaturesAccessory Search button Counter Reset buttonFront Panel TRACKING/V. Still or + buttonOFF indicator Locations of Controls and IndicatorsOperation Indicators Operation Mode IndicatorRS485 B Back PanelConnections Power Cord InstallationAbout the memory reset Reference pages are shown in square brackets Types of ON-SCREEN Displays and Display SequenceShuttle ring Using the JOG dial and Shuttle ringTypes of ON-SCREEN Displays and Display Sequence JOG dialLast 2 digits only are displayed Setting the Language and ClockSetting procedure is now completed Day of week is set automaticallyDate and time are displayed Changing the ON-SCREEN DisplaySelecting the On-screen Display Changing the Date/Time Display PositionVideo Cassette Tapes Correct tape thread check function Setting the Action to Take When a Cassette is LoadedVideo Cassette Tapes Record Pause Recording Speed ModeNormal Recording Normal Recording Before startingConcerning the Number of Times Tapes can be Rerecorded on Changes to the Recording Speed Mode During RecordingAction to Take when the Video Signal Deteriorates Normal RecordingClog Detection Recording CheckAutorepeat Recording Setting the Mode at the End of the TapeRepeat indicator will light Alarm Mode setting is flashingAlarm Recording Setting Alarm RecordingChecking the Alarm Recordings Time Alarm RecordingAlarm Recording Counter Display Connections to the Alarm IN/OUT TerminalsAlarm Scan Alarm SearchRecording will not take place Program Timer RecordingDay of the week of the 8th line is flashing Program Timer RecordingTo Cancel all Program Timer Recordings Setting the HolidaysChanging a Program Timer Recording To Cancel a Program Timer RecordingThese portions will not be recorded Recording Using AN External Timer Input Series recording connections Series Recording SetupRepeat REC switch Series RecordingLoop recording connection example with 2 VCRs Continous Loop Recording SetupSeries Recording Normal Playback Special Playback D Search 01 0000 will be displayed on screen Special PlaybackDay/Time Search Shuttle Ring OperationIs displayed on the digital display Setting the Security LockCounter will be reset to 0H 00M 00S Tape CounterSetting procedure on the first VCR is now completed Setting the BuzzerClock Adjustment Eject in terminal Setting the Cassette Eject ModeCassette Eject Setup Eject terminal connectionData Transfer Speed Setup Setting the RS-232C or RS-485 Data Transfer SpeedDIP Switches Setup RS-485 Connection Setting the RS-232C or RS-485 Data Transfer SpeedRS485 RJ-11 connector layout Connector a Connector B SignalTape END OUT Terminal Timer OUT TerminalTape END OUT Terminal Output Setting Output TerminalsOutput Terminals Series OUT/NON REC OUT terminal settingSW OUT Terminal Output Setting Field or Frame setting is flashingRemote Jack Remote control settingMaintenance Maintaining and Checking The Mechanism MaintenanceMaintenance Table System Down Troubleshooting GuideAfter a Power Failure Specifications Weekdays 830 AM 500 PM Pacific Time Sanyo Industrial VCR WarrantyRC4QR/U2