Sanyo srt-6000 instruction manual Recording Check, Clog Detection

Page 16

NORMAL RECORDING

Recording Check

The image being recorded can be checked.

1During recording, press the PLAY (REC CHECK) button.

øThe tape will be rewound and then played back. The VCR will then return to the previous recording mode.

NOTE:

œDuring recording check operations, recording is suspended momentarily.

Clog Detection

This VCR is equipped with a clog detection function.

The recording quality is monitored automatically. When the heads are dirty and the recording quality deteriorates, the output at the WARNING OUT terminal becomes 0V (Low), the “m” indicator flashes on the digital display, and the buzzer sounds.

If in the (SET UP 3) menu, CLOG DETECT. is set to “N”, the recording quality is not monitored.

NOTES:

œTo cancel the “m” indicator display and reset the WARNING OUT terminal output, press the STOP button.

œClog detection is not possible if recording in 8-hour mode.

English

Image 16

Contents SRT-6000 Precautions Accessory FeaturesContents Counter Reset button Front PanelTRACKING/V. Still or + button Search buttonLocations of Controls and Indicators Operation IndicatorsOperation Mode Indicator OFF indicatorBack Panel RS485 BAbout the memory reset Power Cord InstallationConnections Types of ON-SCREEN Displays and Display Sequence Reference pages are shown in square bracketsUsing the JOG dial and Shuttle ring Types of ON-SCREEN Displays and Display SequenceJOG dial Shuttle ringSetting the Language and Clock Setting procedure is now completedDay of week is set automatically Last 2 digits only are displayedChanging the ON-SCREEN Display Selecting the On-screen DisplayChanging the Date/Time Display Position Date and time are displayedVideo Cassette Tapes Video Cassette Tapes Setting the Action to Take When a Cassette is LoadedCorrect tape thread check function Recording Speed Mode Normal RecordingNormal Recording Before starting Record PauseChanges to the Recording Speed Mode During Recording Action to Take when the Video Signal DeterioratesNormal Recording Concerning the Number of Times Tapes can be Rerecorded onRecording Check Clog DetectionSetting the Mode at the End of the Tape Repeat indicator will lightAlarm Mode setting is flashing Autorepeat RecordingAlarm Recording Alarm Recording SettingAlarm Recording Alarm Recording Counter DisplayConnections to the Alarm IN/OUT Terminals Checking the Alarm Recordings TimeAlarm Search Alarm ScanProgram Timer Recording Recording will not take placeProgram Timer Recording Day of the week of the 8th line is flashingSetting the Holidays Changing a Program Timer RecordingTo Cancel a Program Timer Recording To Cancel all Program Timer RecordingsThese portions will not be recorded Recording Using AN External Timer Input Series Recording Setup Repeat REC switchSeries Recording Series recording connectionsSeries Recording Continous Loop Recording SetupLoop recording connection example with 2 VCRs Normal Playback Special Playback Special Playback Day/Time SearchShuttle Ring Operation D Search 01 0000 will be displayed on screenSetting the Security Lock Counter will be reset to 0H 00M 00STape Counter Is displayed on the digital displayClock Adjustment Setting the BuzzerSetting procedure on the first VCR is now completed Setting the Cassette Eject Mode Cassette Eject SetupEject terminal connection Eject in terminalDIP Switches Setup Setting the RS-232C or RS-485 Data Transfer SpeedData Transfer Speed Setup Setting the RS-232C or RS-485 Data Transfer Speed RS485 RJ-11 connector layoutConnector a Connector B Signal RS-485 ConnectionTimer OUT Terminal Tape END OUT Terminal Output SettingOutput Terminals Tape END OUT TerminalSeries OUT/NON REC OUT terminal setting SW OUT Terminal Output SettingField or Frame setting is flashing Output TerminalsRemote control setting Remote JackMaintenance Maintenance Table MaintenanceMaintaining and Checking The Mechanism After a Power Failure Troubleshooting GuideSystem Down Specifications Sanyo Industrial VCR Warranty Weekdays 830 AM 500 PM Pacific TimeRC4QR/U2