Sanyo srt-6000 Setting the RS-232C or RS-485 Data Transfer Speed, RS485 RJ-11 connector layout

Page 35

SETTING THE RS-232C OR RS-485 DATA TRANSFER SPEED

RS485 RJ-11 connector layout

		1	6
	NOTE: Do not connect to phone line.

	Pin number	Connector A		Connector B
	Pin number	signal		signal
		signal		signal
	1	Not used		Not used

	2	Not used		Not used

	3		A	B

	4		B	A

	5	Not used		Not used

	6	Not used		Not used

A:Non-inverting driver output/receiver input

B:Inverting driver output/receiver input

RS-485 Connection

This VCR can use the straight type or crossed type connecting cables.

If using a straight type cable, connect it from the “A” to the “A” or from the “B” to the “B” RS-485 connector.

If using a crossed type cable, connect it from the “A” to the “B” or from the “B” to the “A” RS-485 connector.

Types of cables

Straight type: A cable with pin connection number correspondence (e.g. pin 1 to pin 1, pin 2 to pin 2, etc.).

Crossed type: A cable without pin connection number correspondence.

CHECKING POWER FAILURE, FAILURE DUE TO CONDENSATION AND USAGE DURATION

1Press the MENU button until the (POWER FAILURE), (DEW) and (USED TIME) menu is displayed.

(POWER FAILURE). . . The number of power failures, and the date and time of the most recent power failure and recovery are displayed.

(DEW) . . . . . . . . . . . . . The number of failures due to condensation, and the date and time of the most recent failure and recovery are displayed.

(USED TIME) . . . . . . . . The video heads usage duration and the power on duration are displayed.

Example

@@@@<POWER@FAILURE>

002@FAILURE@@12-25@07:15

@@@@RECOVERY@12-25@07:30

@@@@@@@@@<DEW>

001@FAILURE@@12-25@11:00

@@@@RECOVERY@12-25@12:00

@@@@@@<USED@TIME>

@@@@VIDEO@@@@@@@@@@00003H

@@@@POWER@@@@@@@@@@00007H

2Press the SEARCH button, the normal screen is displayed.

NOTE:

œIf the MENU RESET button is pressed while the (POWER FAILURE) and (DEW) menu is displayed, the

data is erased. The (USED TIME) data cannot be reset. “@” will be erased from the digital display.

34

English

Image 35

Contents SRT-6000 Precautions Contents FeaturesAccessory Search button Counter Reset buttonFront Panel TRACKING/V. Still or + buttonOFF indicator Locations of Controls and IndicatorsOperation Indicators Operation Mode IndicatorRS485 B Back PanelConnections Power Cord InstallationAbout the memory reset Reference pages are shown in square brackets Types of ON-SCREEN Displays and Display SequenceShuttle ring Using the JOG dial and Shuttle ringTypes of ON-SCREEN Displays and Display Sequence JOG dialLast 2 digits only are displayed Setting the Language and ClockSetting procedure is now completed Day of week is set automaticallyDate and time are displayed Changing the ON-SCREEN DisplaySelecting the On-screen Display Changing the Date/Time Display PositionVideo Cassette Tapes Correct tape thread check function Setting the Action to Take When a Cassette is LoadedVideo Cassette Tapes Record Pause Recording Speed ModeNormal Recording Normal Recording Before startingConcerning the Number of Times Tapes can be Rerecorded on Changes to the Recording Speed Mode During RecordingAction to Take when the Video Signal Deteriorates Normal RecordingClog Detection Recording CheckAutorepeat Recording Setting the Mode at the End of the TapeRepeat indicator will light Alarm Mode setting is flashingAlarm Recording Setting Alarm RecordingChecking the Alarm Recordings Time Alarm RecordingAlarm Recording Counter Display Connections to the Alarm IN/OUT TerminalsAlarm Scan Alarm SearchRecording will not take place Program Timer RecordingDay of the week of the 8th line is flashing Program Timer RecordingTo Cancel all Program Timer Recordings Setting the HolidaysChanging a Program Timer Recording To Cancel a Program Timer RecordingThese portions will not be recorded Recording Using AN External Timer Input Series recording connections Series Recording SetupRepeat REC switch Series RecordingLoop recording connection example with 2 VCRs Continous Loop Recording SetupSeries Recording Normal Playback Special Playback D Search 01 0000 will be displayed on screen Special PlaybackDay/Time Search Shuttle Ring OperationIs displayed on the digital display Setting the Security LockCounter will be reset to 0H 00M 00S Tape CounterSetting procedure on the first VCR is now completed Setting the BuzzerClock Adjustment Eject in terminal Setting the Cassette Eject ModeCassette Eject Setup Eject terminal connectionData Transfer Speed Setup Setting the RS-232C or RS-485 Data Transfer SpeedDIP Switches Setup RS-485 Connection Setting the RS-232C or RS-485 Data Transfer SpeedRS485 RJ-11 connector layout Connector a Connector B SignalTape END OUT Terminal Timer OUT TerminalTape END OUT Terminal Output Setting Output TerminalsOutput Terminals Series OUT/NON REC OUT terminal settingSW OUT Terminal Output Setting Field or Frame setting is flashingRemote Jack Remote control settingMaintenance Maintaining and Checking The Mechanism MaintenanceMaintenance Table System Down Troubleshooting GuideAfter a Power Failure Specifications Weekdays 830 AM 500 PM Pacific Time Sanyo Industrial VCR WarrantyRC4QR/U2