Sanyo srt-6000 instruction manual Normal Playback

Page 28

NORMAL PLAYBACK

Normal Playback

1Turn on the power to the VCR and TV monitor.

2Load the video cassette tape.

3Press the REC/PLAY SPEED l (or j) button to select the playback speed mode.

øThe selected playback speed mode is displayed on the digital display.

NOTE:

œA slow motion effect or accelerated playback effect can be achieved by using a slower or faster playback speed than the speed used for recording.

4Press the PLAY button.

øPlayback starts.

øIf necessary, adjust the tracking to eliminate the noise from the picture.

øIf the image is unstable (rolling vertically), adjust the vertical lock control to correct.

5To stop playback, press the STOP button.

øTo advance or rewind the tape, turn the SHUTTLE ring clockwise or counterclockwise.

NOTES:

œIf a tape recorded in SP mode on a standard VCR is loaded, playback will be done in 2-hour mode.

œThis real time video recorder can playback recordings made on a time lapse VCR from the same manufacturer.

œA tape recorded on a time lapse VCR produced by another manufacturer may not play back with the same degree of clarity on this unit.

œWhen used with a multiplexer in 24- or 40-hour mode playback (or when the TAPE SELECT switch is set to “T-120”, in 18- or 30-hour mode playback), the image may roll vertically. In such a case, in menu (SET UP 3) set “VERTICAL SYNC.” to “N”.

Tracking Control

If there is noise in the image during playback,

1While looking at the playback picture, press and hold the TRACKING/V. STILL+ button to minimize the noise.

2If it cannot be minimized, press the TRACKING/V. STILL– button.

Vertical Lock Control

During still image mode,

1Press and hold the TRACKING/V. STILL+ button to reduce the vertical rolling of the image.

2If it cannot be corrected, press the TRACKING/V. STILL– button.

Sharpness Control

Turn the SHARPNESS control clockwise or counterclockwise for the desired sharpness of the image.

Audio Playback

œAudio playback is only possible in 8-hour, 24-hour and 40-hour modes. (When the TAPE SELECT switch is set to “T-120”, in 6-hour, 18-hour and 30-hour modes.)

œThe playback speed has to be the same as the recording speed, for normal playback of the audio.

English

27

Image 28
Contents SRT-6000 Precautions Accessory FeaturesContents Counter Reset button Front PanelTRACKING/V. Still or + button Search buttonLocations of Controls and Indicators Operation IndicatorsOperation Mode Indicator OFF indicatorBack Panel RS485 BAbout the memory reset Power Cord InstallationConnections Types of ON-SCREEN Displays and Display Sequence Reference pages are shown in square bracketsUsing the JOG dial and Shuttle ring Types of ON-SCREEN Displays and Display SequenceJOG dial Shuttle ringSetting the Language and Clock Setting procedure is now completedDay of week is set automatically Last 2 digits only are displayedChanging the ON-SCREEN Display Selecting the On-screen DisplayChanging the Date/Time Display Position Date and time are displayedVideo Cassette Tapes Video Cassette Tapes Setting the Action to Take When a Cassette is LoadedCorrect tape thread check function Recording Speed Mode Normal RecordingNormal Recording Before starting Record PauseChanges to the Recording Speed Mode During Recording Action to Take when the Video Signal DeterioratesNormal Recording Concerning the Number of Times Tapes can be Rerecorded onRecording Check Clog DetectionSetting the Mode at the End of the Tape Repeat indicator will lightAlarm Mode setting is flashing Autorepeat RecordingAlarm Recording Alarm Recording SettingAlarm Recording Alarm Recording Counter DisplayConnections to the Alarm IN/OUT Terminals Checking the Alarm Recordings TimeAlarm Search Alarm ScanProgram Timer Recording Recording will not take placeProgram Timer Recording Day of the week of the 8th line is flashingSetting the Holidays Changing a Program Timer RecordingTo Cancel a Program Timer Recording To Cancel all Program Timer RecordingsThese portions will not be recorded Recording Using AN External Timer Input Series Recording Setup Repeat REC switchSeries Recording Series recording connectionsSeries Recording Continous Loop Recording SetupLoop recording connection example with 2 VCRs Normal Playback Special Playback Special Playback Day/Time SearchShuttle Ring Operation D Search 01 0000 will be displayed on screenSetting the Security Lock Counter will be reset to 0H 00M 00STape Counter Is displayed on the digital displayClock Adjustment Setting the BuzzerSetting procedure on the first VCR is now completed Setting the Cassette Eject Mode Cassette Eject SetupEject terminal connection Eject in terminalDIP Switches Setup Setting the RS-232C or RS-485 Data Transfer SpeedData Transfer Speed Setup Setting the RS-232C or RS-485 Data Transfer Speed RS485 RJ-11 connector layoutConnector a Connector B Signal RS-485 ConnectionTimer OUT Terminal Tape END OUT Terminal Output SettingOutput Terminals Tape END OUT TerminalSeries OUT/NON REC OUT terminal setting SW OUT Terminal Output SettingField or Frame setting is flashing Output TerminalsRemote control setting Remote JackMaintenance Maintenance Table MaintenanceMaintaining and Checking The Mechanism After a Power Failure Troubleshooting GuideSystem Down Specifications Sanyo Industrial VCR Warranty Weekdays 830 AM 500 PM Pacific TimeRC4QR/U2