Sanyo srt-6000 Alarm Recording Counter Display, Connections to the Alarm IN/OUT Terminals

Page 19

ALARM RECORDING

Alarm Recording Counter Display

œDuring alarm recording, “AL” will be flashing on the digital display.

œIf the ON SCREEN switch is set to the “ON” position, the number of alarms will flash on the monitor screen.

œThe maximum display number of alarm recordings is “999”, at the next alarm recording the counter will indicate “000”.

œWhen the (ALARM TIME) menu is displayed, press the MENU RESET button to reset the alarm counter to “000” (all the data of the (ALARM TIME) menu is reset).

Connections to the ALARM IN/OUT Terminals

œAlarm input signal

Connect a make-contact (no voltage) switch between the ALARM IN and COM terminals.

œAlarm output signal

Normally DC 5V are output between the ALARM OUT and the COM terminals. When an alarm input (trigger) is received and the unit is recording, the output falls to 0V. Once the alarm recording is over, the output returns to DC 5V.

Checking the Alarm Recordings Time

1Press the MENU button until the (ALARM TIME) menu is displayed.

øThe number of alarm recordings, and the 8 most recent alarm recording times are displayed.

@@@@@@<ALARM@TIME>

@@@@008@12-25@19:00

@@@@@@@@11-25@23:00

@@@@@@@@11-25@15:00

@@@@@@@@10-25@08:00

@@@@@@@@10-25@06:00

@@@@@@@@09-25@20:00

@@@@@@@@09-25@16:35

@@@@@@@@09-25@10:52

NOTE:

œThe data for the previous alarm recordings is erased.

2Press the SEARCH button, the normal screen is displayed.

NOTE:

œIf the MENU RESET button is pressed while the (ALARM TIME) menu is displayed, the displayed data is erased. “AL” will be erased from the digital display.

18

English

Image 19

Contents SRT-6000 Precautions Accessory FeaturesContents Search button Counter Reset buttonFront Panel TRACKING/V. Still or + buttonOFF indicator Locations of Controls and IndicatorsOperation Indicators Operation Mode IndicatorRS485 B Back PanelAbout the memory reset Power Cord InstallationConnections Reference pages are shown in square brackets Types of ON-SCREEN Displays and Display SequenceShuttle ring Using the JOG dial and Shuttle ringTypes of ON-SCREEN Displays and Display Sequence JOG dialLast 2 digits only are displayed Setting the Language and ClockSetting procedure is now completed Day of week is set automaticallyDate and time are displayed Changing the ON-SCREEN DisplaySelecting the On-screen Display Changing the Date/Time Display PositionVideo Cassette Tapes Video Cassette Tapes Setting the Action to Take When a Cassette is LoadedCorrect tape thread check function Record Pause Recording Speed ModeNormal Recording Normal Recording Before startingConcerning the Number of Times Tapes can be Rerecorded on Changes to the Recording Speed Mode During RecordingAction to Take when the Video Signal Deteriorates Normal RecordingClog Detection Recording CheckAutorepeat Recording Setting the Mode at the End of the TapeRepeat indicator will light Alarm Mode setting is flashingAlarm Recording Setting Alarm RecordingChecking the Alarm Recordings Time Alarm RecordingAlarm Recording Counter Display Connections to the Alarm IN/OUT TerminalsAlarm Scan Alarm SearchRecording will not take place Program Timer RecordingDay of the week of the 8th line is flashing Program Timer RecordingTo Cancel all Program Timer Recordings Setting the HolidaysChanging a Program Timer Recording To Cancel a Program Timer RecordingThese portions will not be recorded Recording Using AN External Timer Input Series recording connections Series Recording SetupRepeat REC switch Series RecordingSeries Recording Continous Loop Recording SetupLoop recording connection example with 2 VCRs Normal Playback Special Playback D Search 01 0000 will be displayed on screen Special PlaybackDay/Time Search Shuttle Ring OperationIs displayed on the digital display Setting the Security LockCounter will be reset to 0H 00M 00S Tape CounterClock Adjustment Setting the BuzzerSetting procedure on the first VCR is now completed Eject in terminal Setting the Cassette Eject ModeCassette Eject Setup Eject terminal connectionDIP Switches Setup Setting the RS-232C or RS-485 Data Transfer SpeedData Transfer Speed Setup RS-485 Connection Setting the RS-232C or RS-485 Data Transfer SpeedRS485 RJ-11 connector layout Connector a Connector B SignalTape END OUT Terminal Timer OUT TerminalTape END OUT Terminal Output Setting Output TerminalsOutput Terminals Series OUT/NON REC OUT terminal settingSW OUT Terminal Output Setting Field or Frame setting is flashingRemote Jack Remote control settingMaintenance Maintenance Table MaintenanceMaintaining and Checking The Mechanism After a Power Failure Troubleshooting GuideSystem Down Specifications Weekdays 830 AM 500 PM Pacific Time Sanyo Industrial VCR WarrantyRC4QR/U2