Sanyo srt-6000 instruction manual Recording Using AN External Timer Input

Page 25

RECORDING USING AN EXTERNAL TIMER INPUT

Recording can be controlled by an external start/stop signal input at the EXT TIMER IN terminal.

Example 3: To record using the signal input at the EXT TIMER IN terminal, in 24-hour mode.

œFollow the Before starting steps, under “NORMAL RECORDING”.

NOTE:

œExternal timer input recording can only be set on the 9th line (EXT) of the (TIMER SET) menu.

1Press the MENU button until the (TIMER SET) menu is displayed.

2Turn the JOG dial, until “EXT” (External) setting is flashing.

øThe “SPD” (recording speed) position will start flashing.

3Turn the SHUTTLE ring to select the recording speed mode (ex: 24), then turn the JOG dial clockwise.

ø“N” will start flashing.

4Turn the SHUTTLE ring to select “Y”.

@@@@@@<TIMER@SET>

WEEK@START@@STOP@@@SPD

SUN@@--:--@@--:--@@---	@N
MON@@--:--@@--:--@@---	@N
TUE@@--:--@@--:--@@---	@N
WED@@--:--@@--:--@@---	@N
THU@@--:--@@--:--@@---	@N
FRI@@--:--@@--:--@@---	@N
SAT@@--:--@@--:--@@---	@N
DLY@@--:--@@--:--@@---	@N

EXT@@ööööö@@ööööö@@@24@Y

5Follow steps F and G under “PROGRAM TIMER RECORDING on page 20”.

øWhen an external signal is input, “E” will light on the digital display and recording will take place.

NOTES:

œOther timer recordings using the standard procedure can also be programmed.

œThe external input signal must be input at the EXT TIMER IN terminal.

24

English

Image 25

Contents SRT-6000 Precautions Accessory FeaturesContents Front Panel Counter Reset buttonTRACKING/V. Still or + button Search buttonOperation Indicators Locations of Controls and IndicatorsOperation Mode Indicator OFF indicatorRS485 B Back PanelAbout the memory reset Power Cord InstallationConnections Reference pages are shown in square brackets Types of ON-SCREEN Displays and Display SequenceTypes of ON-SCREEN Displays and Display Sequence Using the JOG dial and Shuttle ringJOG dial Shuttle ringSetting procedure is now completed Setting the Language and ClockDay of week is set automatically Last 2 digits only are displayedSelecting the On-screen Display Changing the ON-SCREEN DisplayChanging the Date/Time Display Position Date and time are displayedVideo Cassette Tapes Video Cassette Tapes Setting the Action to Take When a Cassette is LoadedCorrect tape thread check function Normal Recording Recording Speed ModeNormal Recording Before starting Record PauseAction to Take when the Video Signal Deteriorates Changes to the Recording Speed Mode During RecordingNormal Recording Concerning the Number of Times Tapes can be Rerecorded onClog Detection Recording CheckRepeat indicator will light Setting the Mode at the End of the TapeAlarm Mode setting is flashing Autorepeat RecordingAlarm Recording Setting Alarm RecordingAlarm Recording Counter Display Alarm RecordingConnections to the Alarm IN/OUT Terminals Checking the Alarm Recordings TimeAlarm Scan Alarm SearchRecording will not take place Program Timer RecordingDay of the week of the 8th line is flashing Program Timer RecordingChanging a Program Timer Recording Setting the HolidaysTo Cancel a Program Timer Recording To Cancel all Program Timer RecordingsThese portions will not be recorded Recording Using AN External Timer Input Repeat REC switch Series Recording SetupSeries Recording Series recording connectionsSeries Recording Continous Loop Recording SetupLoop recording connection example with 2 VCRs Normal Playback Special Playback Day/Time Search Special PlaybackShuttle Ring Operation D Search 01 0000 will be displayed on screenCounter will be reset to 0H 00M 00S Setting the Security LockTape Counter Is displayed on the digital displayClock Adjustment Setting the BuzzerSetting procedure on the first VCR is now completed Cassette Eject Setup Setting the Cassette Eject ModeEject terminal connection Eject in terminalDIP Switches Setup Setting the RS-232C or RS-485 Data Transfer SpeedData Transfer Speed Setup RS485 RJ-11 connector layout Setting the RS-232C or RS-485 Data Transfer SpeedConnector a Connector B Signal RS-485 ConnectionTape END OUT Terminal Output Setting Timer OUT TerminalOutput Terminals Tape END OUT TerminalSW OUT Terminal Output Setting Series OUT/NON REC OUT terminal settingField or Frame setting is flashing Output TerminalsRemote Jack Remote control settingMaintenance Maintenance Table MaintenanceMaintaining and Checking The Mechanism After a Power Failure Troubleshooting GuideSystem Down Specifications Weekdays 830 AM 500 PM Pacific Time Sanyo Industrial VCR WarrantyRC4QR/U2