Sanyo srt-6000 instruction manual Setting the Buzzer, Clock Adjustment

Page 32

SETTING THE BUZZER

A buzzer can be set to sound during alarm recording, if during recording the tape reaches the end, if buttons are pressed or if there is a mechanical failure that causes the tape to stop or be ejected, etc.

1Press the MENU button until the (SET UP 2) menu is displayed.

@@@@@@@<SET@UP@2>

öDISPLAY

@@@DATE@@@@@@@@@@@Y

@@@TIME@@@@@@@@@@@Y

@@@ALARM@COUNT@@@@Y

TAPE END . . The buzzer will be heard when the end of the tape is reached during recording. To stop the buzzer, press the STOP, EJECT or PLAY button, or turn the SHUTTLE ring.

KEY IN . . . . . The buzzer will be heard when one of the VCR buttons is pressed or when the JOG dial or the SHUTTLE ring is turned.

@@@SPEED@@@@@@@@@@Y

WARNING . . The buzzer will be heard if the

öBUZZER

@@@ALARM@IN@@@@@@@Y

heads are dirty and recording

@@@TAPE@END@@@@@@@Y

@@@KEY@IN@@@@@@@@@N

qualtiy deteriorate, or if the tape

 

@@@WARNING@@@@@@@@Y

stops or is ejected due to a

2 Turn the JOG dial, until the desired item for which the

problem with the internal

buzzer function will be set is flashing.

mechanism. To stop the buzzer,

 

3 Turn the SHUTTLE ring to set “Y” for the functions

press the STOP button.

described below.

4 Press the SEARCH button to save the setting.

ALARM IN . . The buzzer will be heard during

ø The setting procedure is now completed.

alarm recording.

 

 

NOTES:

 

œ If “N” is set, the buzzer will not be heard.

 

œ During timer recording mode, security lock engaged

 

mode and alarm recording mode, the buzzer will not be

 

heard when a button related to one of these modes is

 

pressed, even if “Y” is set for the “KEY IN” item.

CLOCK ADJUSTMENT

When using 2 or more VCRs of this same model, the clock on the second VCR and on, can be synchronized with the clock on the first VCR, using the CLOCK ADJUSTMENT function.

1Connect the CLOCK SET OUT terminal on VCR 1 to the CLOCK SET IN terminal on VCR 2.

2Repeat the procedure for all the other VCRs, connecting the CLOCK SET OUT terminal on VCR 2 to the CLOCK SET IN terminal on VCR 3, and so on.

3Press the MENU button until the (SET UP 3) menu is displayed.

4Turn the JOG dial, until the “EXT TIME ADJ.” setting is flashing.

5Turn the SHUTTLE ring to set the hour at which the adjustment will be conducted.

NOTES:

œBe sure to set the same time on all the VCRs.

œThe clock adjustment cannot be set to “00:00”.

Example

@@@@@@@<SET@UP@3>

öALARM@MODE@@@@@@@Y1

öALARM@DURATION@@@20S

öVERTICAL@SYNC@@@@Y

öEXT@TIME@ADJ.@@@@03:00

öTAPE@IN@MODE@@@@@STOP

öTAPE@END@MODE@@@@REW öTAPE@END@OUT@@@@@-3M öCLOG@DETECT.@@@@@Y öSERIES@REC@IN@@@@N öRS-232C@@@@@@@@@@19200

6Press the SEARCH button to save the setting.

øThe setting procedure on the first VCR is now completed.

7Repeat the procedure for all the other VCRs, setting “EXT TIME ADJ.” (to the same time as set on the first VCR).

NOTES:

œConnect the COM terminal on all VCRs used.

œThis function will not operate on the day the daylight saving/standard time is changed.

English

31

Page 31 Page 33
Image 32
Page 31 Page 33
Contents SRT-6000 Precautions Contents FeaturesAccessory Counter Reset button Front PanelTRACKING/V. Still or + button Search buttonLocations of Controls and Indicators Operation IndicatorsOperation Mode Indicator OFF indicatorBack Panel RS485 BConnections Power Cord InstallationAbout the memory reset Types of ON-SCREEN Displays and Display Sequence Reference pages are shown in square bracketsUsing the JOG dial and Shuttle ring Types of ON-SCREEN Displays and Display SequenceJOG dial Shuttle ringSetting the Language and Clock Setting procedure is now completedDay of week is set automatically Last 2 digits only are displayedChanging the ON-SCREEN Display Selecting the On-screen DisplayChanging the Date/Time Display Position Date and time are displayedVideo Cassette Tapes Correct tape thread check function Setting the Action to Take When a Cassette is LoadedVideo Cassette Tapes Recording Speed Mode Normal RecordingNormal Recording Before starting Record PauseChanges to the Recording Speed Mode During Recording Action to Take when the Video Signal DeterioratesNormal Recording Concerning the Number of Times Tapes can be Rerecorded onRecording Check Clog DetectionSetting the Mode at the End of the Tape Repeat indicator will lightAlarm Mode setting is flashing Autorepeat RecordingAlarm Recording Alarm Recording SettingAlarm Recording Alarm Recording Counter DisplayConnections to the Alarm IN/OUT Terminals Checking the Alarm Recordings TimeAlarm Search Alarm ScanProgram Timer Recording Recording will not take placeProgram Timer Recording Day of the week of the 8th line is flashingSetting the Holidays Changing a Program Timer RecordingTo Cancel a Program Timer Recording To Cancel all Program Timer RecordingsThese portions will not be recorded Recording Using AN External Timer Input Series Recording Setup Repeat REC switchSeries Recording Series recording connectionsLoop recording connection example with 2 VCRs Continous Loop Recording SetupSeries Recording Normal Playback Special Playback Special Playback Day/Time SearchShuttle Ring Operation D Search 01 0000 will be displayed on screenSetting the Security Lock Counter will be reset to 0H 00M 00STape Counter Is displayed on the digital displaySetting procedure on the first VCR is now completed Setting the BuzzerClock Adjustment Setting the Cassette Eject Mode Cassette Eject SetupEject terminal connection Eject in terminalData Transfer Speed Setup Setting the RS-232C or RS-485 Data Transfer SpeedDIP Switches Setup Setting the RS-232C or RS-485 Data Transfer Speed RS485 RJ-11 connector layoutConnector a Connector B Signal RS-485 ConnectionTimer OUT Terminal Tape END OUT Terminal Output SettingOutput Terminals Tape END OUT TerminalSeries OUT/NON REC OUT terminal setting SW OUT Terminal Output SettingField or Frame setting is flashing Output TerminalsRemote control setting Remote JackMaintenance Maintaining and Checking The Mechanism MaintenanceMaintenance Table System Down Troubleshooting GuideAfter a Power Failure Specifications Sanyo Industrial VCR Warranty Weekdays 830 AM 500 PM Pacific TimeRC4QR/U2
Top Page Image Contents