Sanyo srt-6000 instruction manual Special Playback

Page 29

SPECIAL PLAYBACK

Picture Search (Forward and Reverse)

1Turn the SHUTTLE ring clockwise (or counterclockwise), during normal playback. See “SHUTTLE Ring Operation”.

øThe image can be seen while the tape is advanced (or rewound) at high speed.

2To return to normal playback, release the SHUTTLE ring.

NOTES:

œDuring picture search, noise (horizontal bars) will appear in the picture.

œThe sound is muted.

Still Image

1Press the STILL/PAUSE button, during normal playback.

øA still image can be viewed.

2To return to normal playback, press the PLAY button.

NOTES:

œIf still mode continues for 5 minutes or more, the VCR will go into stop mode to avoid damaging the tape.

œIf the image is unstable (rolling vertically), adjust the vertical lock control to correct.

Frame Advance

1Turn the JOG dial clockwise (or counterclockwise), during still image mode.

øThe still image is advanced (or rewound) of one image (field).

øTurn the dial faster to increase the speed of the frame advance.

2To return to normal playback, press the PLAY button.

NOTES:

œDuring reverse frame advance, noise will appear in the picture.

œIf frame advance mode continues for 5 minutes or more, the VCR will go into stop mode to avoid damaging the tape.

Reverse Playback

1Turn the SHUTTLE ring counterclockwise and hold it, during normal playback. See “SHUTTLE Ring Operation”.

øReverse playback will start.

2To return to normal playback, release the SHUTTLE ring.

NOTES:

œDuring reverse playback, noise will appear in the picture.

œReverse playback is only possible during 8-hour playback speed mode.

œThe sound is muted.

Slow motion (Forward and Reverse)

1Turn the SHUTTLE ring clockwise (or counterclockwise) and hold it, during still image mode. See “SHUTTLE Ring Operation”.

øForward (or reverse) slow motion playback will start.

2To return to normal playback, press the PLAY button.

NOTES:

œIf slow motion mode continues for 5 minutes or more, the VCR will go into stop mode to avoid damaging the tape.

œThe sound is muted.

28

English

Image 29

Contents SRT-6000 Precautions Contents FeaturesAccessory Front Panel Counter Reset buttonTRACKING/V. Still or + button Search buttonOperation Indicators Locations of Controls and IndicatorsOperation Mode Indicator OFF indicatorRS485 B Back PanelConnections Power Cord InstallationAbout the memory reset Reference pages are shown in square brackets Types of ON-SCREEN Displays and Display SequenceTypes of ON-SCREEN Displays and Display Sequence Using the JOG dial and Shuttle ringJOG dial Shuttle ringSetting procedure is now completed Setting the Language and ClockDay of week is set automatically Last 2 digits only are displayedSelecting the On-screen Display Changing the ON-SCREEN DisplayChanging the Date/Time Display Position Date and time are displayedVideo Cassette Tapes Correct tape thread check function Setting the Action to Take When a Cassette is LoadedVideo Cassette Tapes Normal Recording Recording Speed ModeNormal Recording Before starting Record PauseAction to Take when the Video Signal Deteriorates Changes to the Recording Speed Mode During RecordingNormal Recording Concerning the Number of Times Tapes can be Rerecorded onClog Detection Recording CheckRepeat indicator will light Setting the Mode at the End of the TapeAlarm Mode setting is flashing Autorepeat RecordingAlarm Recording Setting Alarm RecordingAlarm Recording Counter Display Alarm RecordingConnections to the Alarm IN/OUT Terminals Checking the Alarm Recordings TimeAlarm Scan Alarm SearchRecording will not take place Program Timer RecordingDay of the week of the 8th line is flashing Program Timer RecordingChanging a Program Timer Recording Setting the HolidaysTo Cancel a Program Timer Recording To Cancel all Program Timer RecordingsThese portions will not be recorded Recording Using AN External Timer Input Repeat REC switch Series Recording SetupSeries Recording Series recording connectionsLoop recording connection example with 2 VCRs Continous Loop Recording SetupSeries Recording Normal Playback Special Playback Day/Time Search Special PlaybackShuttle Ring Operation D Search 01 0000 will be displayed on screenCounter will be reset to 0H 00M 00S Setting the Security LockTape Counter Is displayed on the digital displaySetting procedure on the first VCR is now completed Setting the BuzzerClock Adjustment Cassette Eject Setup Setting the Cassette Eject ModeEject terminal connection Eject in terminalData Transfer Speed Setup Setting the RS-232C or RS-485 Data Transfer SpeedDIP Switches Setup RS485 RJ-11 connector layout Setting the RS-232C or RS-485 Data Transfer SpeedConnector a Connector B Signal RS-485 ConnectionTape END OUT Terminal Output Setting Timer OUT TerminalOutput Terminals Tape END OUT TerminalSW OUT Terminal Output Setting Series OUT/NON REC OUT terminal settingField or Frame setting is flashing Output TerminalsRemote Jack Remote control settingMaintenance Maintaining and Checking The Mechanism MaintenanceMaintenance Table System Down Troubleshooting GuideAfter a Power Failure Specifications Weekdays 830 AM 500 PM Pacific Time Sanyo Industrial VCR WarrantyRC4QR/U2