Sanyo srt-6000 instruction manual Series Recording, Continous Loop Recording Setup

SERIES RECORDING

Continous Loop Recording Setup

It is possible to configure at least two this VCR for continous loop recording.

Under loop recording when the recording finishes on the first unit, the new recording will start on the second unit. When the recording finishes on the second unit, recording will start on the first unit.

œThe SERIES OUT terminal of VCR No.2 and the SERIES IN terminal No.1 should be connected (See diagram).

œSet the TAPE SELECT switch according to the duration of the tape used.

1Press the REC/PLAY SPEED l (or j) button to set the recording speed mode.

2Set the following items as indicated.

Item	VCR No.1	VCR No.2
Cassette tape	Loaded	Loaded
Operation mode	Stop	Stop
REPEAT REC switch	OFF	OFF
Counter memory	Canceled	Canceled
“OUTPUT” (in (SET UP	SERIES	SERIES
1) menu)
“TAPE END MODE” (in	REW	REW
(SET UP 3) menu)
“SERIES REC IN” (in	Y (YES)	Y (YES)
(SET UP 3) menu)
Timer recording	OFF (not set)	OFF (not set)
Security lock	Canceled	Set

Loop recording connection (example with 2 VCRs)

Video camera

		To
VCR No.1		VIDEO IN
		jack
A RS485	B
OFF	232 OFF	PUSH
		OPEN

		AUDIO		VIDEO
REMOTE	MIC IN	IN	OUT	IN	OUT
AC IN ~
RS232C

To

SERIES OUT terminal

To

VIDEO OUT

To jack

SERIES IN terminal

To COM terminal

3Press the REC button on VCR No.1.

øRecording will start in series recording mode.

4Set the security lock on VCR No.1.

NOTES:

œThe “TAPE END MODE” in (SET UP 3) menu should be set to “REW” for both units without fail.

œIn loop recording mode, the tape will be re-recorded over. If you need to keep the recorded infomation, please eject the tape after recording is complete and insert a new tape.

Monitor TV

	To VIDEO IN jack	To
VCR No.2		VIDEO OUT
		jack

A RS485	B
OFF		OFF			PUSH
	232				OPEN
				AUDIO	VIDEO
		REMOTE	MIC IN	IN OUT	IN OUT
AC IN ~
RS232C
			To		To COM
SERIES OUT
		terminal			terminal
		To
SERIES IN
terminal

26 English