Memorex MVR4042 To Stop Recording Temporarily, Recording ONE Program While Watching Another

CH 110

CH 110

RECORDING A TV PROGRAM

2Press the SPEED selector button to select the desired tape speed SP or SLP.

The counter and SP or SLP will

appear on the screen for about		00 : 00 : 00 SP
4 seconds.
VHF/UHF/CATV CHANNELS
TV	CATV
VHF	VHF
2-13	2-13
UHF	STD/HRC/IRC
14-69	14-36	(A) (W)
	37-59 (AA) (WW)
	60-85	(AAA) (ZZZ)
	86-94	(86) (94)
	95-99	(A-5) (A-1)
	100-125	(100)(125)
	01	(5A)

3Press the direct channel selection buttons or the CHANNEL or button to select the channel to be recorded.

1-9 Press 0 twice and then 1-9 as required. Example: To select 2, Press “002”.

10-19 Press 0 first and then the remaining 2 digits in

order from left to right. Example: Press 012 for “12”.

20-99 Press 2 digits in order. Example: Press 22 for “22”.

100-125 Press the 3 digits in order.

Example: Press 110 for “110”.

4Press the REC/OTR button.

" " will appear on the screen for about 4 seconds and the REC indicator will light.

NOTE: Since the VCR has its own TV tuner, it is not actually necessary to have the TV turned on in order to make a recording. Turning on the TV merely allows confirmation of the proper channel settings on your VCR.

TO STOP RECORDING

Press the STOP button to stop recording.

" " will appear on screen for about 4 seconds.

TO STOP RECORDING TEMPORARILY

Press the PAUSE/STILL button to avoid recording unwanted material. Press again or press the REC/OTR button to continue the recording.

"" will appear on screen for about 4 seconds and the REC indicator will blink to continue pause mode.

NOTE: The pause function will be released after 5 minutes to prevent damage to the tape or the VCR. The VCR will change to the STOP mode.

NOTE: AUTO REWIND FEATURE

This VCR will automatically rewind the tape when the tape has ended (except during OTR and TIMER REC). It will also eject the tape and turn the VCR’s power OFF.

RECORDING ONE PROGRAM WHILE WATCHING ANOTHER

While the VCR is recording, press the TV/VCR selector button to select the TV position.

The TV/VCR indicator will go off and recording will continue.

Select the TV channel you want to watch by using the TV channel selector.

NOTE: Some CATV hookups do not permit viewing one channel while recording another. See pages 12,13.

TO PREVENT AN ACCIDENTAL RECORDING

After recording, break off the erase prevention tab if you do not wish to record over the tape.

Screwdriver

Erase prevention tab

TO RECORD AGAIN

Cover the hole with adhesive tape.

Be careful the tape does not extend past the edges of the cassette housing.

Adhesive tape

19

ENGLISH

4F90701A/E P14-19 19 20/03/2003, 10:32