Klark Teknik DN9344E, DN9340E Touch Strip, Store and Recall, Home Setup and Data Entry

Controls, Connectors, Indicators: DN9340E

3.3. Touch Strip, Store and Recall, Home (Setup) and Data Entry

4

1 2 3

1Two part touch strip The touchstrip is used to select individual faders or filters and can also be used to adjust gain settings. Press either part briefly to select a particular filter or fader. Press and hold or tap repeatedly to increase the level (upper strip) or reduce it (lower strip). Note that the lower strip is deeper than the upper one to reflect that it is generally more urgent to reduce gain. Pressing the upper and lower strips simultaneously allows the creation of fader groups.

2	STORE and RECALL	Used to store complete unit settings to one of the 32 user
	buttons	memory locations and then to recall them. In addition to
		user memories, settings may be recalled from 32 preset
		memories that can only be manipulated by means of an
		external computer.
	HOME (SETUP) button
3		Press once to return to the home page from any of the
		individual EQ pages. Once on the home page, press and
		hold for one second to access the setup menu. Step

through the setup menu (and exit after the last item) by repeatedly pressing this button. The HOME (SETUP) button is also used to exit from STORE and RECALL operations.

4Left, centre and right Used for controlling values and selecting options. Each knob

encoder knobs	is surrounded by a blue ring that illuminates to show that
	the knob is active in the current mode.

9