Klark Teknik DN9344E Setup Menu DN9340E, General, To access the Set Up menu pages

Page 36

Setup Menu: DN9340E

7. SETUP MENU: DN9340E

7.1. General

The DN9340E provides various set up options for adapting the operation of the unit to best suit your operational requirements and preferences, as follows:

•Comms channel setting for controlling a network remotely via a PC or using a DN9340E as a master controller (Page 1)

• Front panel lockout for security (Page 2)

• Analogue/digital input select (Page 3)

• Digital output clock select (Page 4)

• Password Page for preset protection (Page 5)

• LCD Display settings (Page 6)

• Unit naming (Page 7)

• Memory naming (Page 8)

• Delay units of measurement (Page 9)

• Power-up logo (Page 10)

•Ethernet settings for remote control operation (Pages 11 and 12)

These options are programmed in the Set Up menu and are described in the following sections in menu order.

To access the Set Up menu pages

Press HOME (SET UP) to return to the Home page.

Press and hold the HOME (SET UP) button to open the menu.

Press the HOME (SET UP) button repeatedly to step through the pages in turn.

Note		This menu does not ‘cycle’. On completing the set up, the menu returns
		to the Home page.

26

Image 36

Contents DN9340E/DN9344E Page Important Safety Instructions Page Declaration of Conformity Page Contents Setup Menu DN9340E Application Notes Page Safety Warning Installation ConsiderationsAfter Unpacking Page Quick Reference DN9340E Front PanelDN9344E Front Panel DN9340E & DN9344E Key Features Key FeaturesIntroducing the DN9340E/DN9344E Host Software VersionsRemote control operation Space efficiencyInterface to Midas consoles Store and Recall ParametersControls, Connectors, Indicators DN9340E EQ Access and DisplaysFront Panel DN9340E Soft keys displaySelected channel both channels if linked. When a Bypass, Channel Select, Soft Keys and Alphanumeric DisplaySoft keys Touch Strip, Store and Recall, Home Setup and Data Entry PC Port, Metering and Power Rear Panel DN9340E MainsInputs a and B Word clock InputSignal Flow DN9340E Signal Flow DN9340EOperation DN9340E Operation DN9340EHome Home page sub-menusTouchstrip Operation on the Home Graphic Equalisation Soft Key FunctionsAutomatic features EQ FlatTouchstrip operation with Graphic equalisation GroupingParametric Equalisation Touchstrip operation with Parametric equalisation EQ removeDynamic Equalisation Lo Threshold / LevelHi Threshold / Level Touchstrip operation with Dynamic equalisation Time constantsFilters Create Filter functionFilter Type Left Encoder Centre Encoder Right Encoder Filter settings Touchstrip operation with FiltersFilter remove Metering Clear Down Sequence Setup Menu DN9340E Setup Menu DN9340ETo access the Set Up menu pages GeneralRemote control via a PC To switch remote communications offComms channel To select a slave remote communications channelUsing a DN9340E for master control To select a master remote communications channelTo select a slave communications channel To remove the unit from the networkFront Panel lock To set a Panel LockTo remove the Panel Lock Analogue/Digital Input Select To change the input sourcePresets lock To set a Presets lockDigital Output Clock Select To select the output clock sourceLCD contrast adjustment Delay optionsNaming Pages 7 To enter a namePower-up Logo Ethernet Settings Pages 11Ethernet IP Address Ethernet Subnet Mask Setup To check and edit the Subnet MaskUsing the DN9340E Memories To store settingsTo recall settings Remote Control ConnectionsAddresses Data modelSetting the master unit on-line Getting startedOn a DN9340E On a DN9344ETo set up the names OperationSystem naming To set up the assignment Copy channel functionSolo Tracking operation Overview Helix DN9340E/DN9344E unit interconnectionsConnecting the Helix DN9340/DN9344E units in a daisy chain Ethernet connection wireless option Ethernet ConnectionEthernet connection standard Configuring the DN9340E for Network Communication Configuring the DN9344E for Network CommunicationConnection and Configuration Procedure Serial Connection OptionSerial connection details Controls, Connectors, Indicators DN9344E Alphanumeric displays, SETUP, Metering and PowerPress to step through the Set Up pages Power Switch Power on Power on indication Power indicationIndicators, Up and Down Buttons, PC Port and Scribble Strips IndicatorsRear Panel DN9344E Mains inlet socket1B, 2A and 2B InterfaceSignal Flow DN9344E Signal Flow DN9344EOperation DN9344E Operation DN9344ERemote Comms channels To select a remote communications channel To enable the Contact Closure Relay mode To disable remote communications and relay operationPassword To set a passwordTo change the settings for Inputs 1A and 1B Analogue/Digital Input Select Pages 3To change the settings for Output Digital Output Clock Select Pages 5Ethernet Settings Subnet MaskTo change the IP address To change the Subnet MaskApplication Notes Dynamic EQApplication Notes Application Notes What do we mean by all these Q types? Proportional Q Constant QSymmetrical Q What is AES/EBU? Technical Specification DN9340E 17.1. DN9340EPower Requirements Technical Specification DN9344E 17.2. DN9344ERelay Socket Pin D-type rear Power Pin IEC Service Information BatteryReplacement

Related manuals

Manual 65 pages 57.17 Kb