TechniSat DigiCorder S2 Output digital, Video parameters Output, Videotext, VHS Hosiden socket

Output digital:
SP/DIF output	electrical, Cinch socket
	optical, Toslink
	Dolby Digital AC3
Video parameters:
Output:
Output level FBAS	1 Vs-s +/- 0.3 dB to 75 Ohms
Output level Y	1 Vs-s +/- 0.3 dB to 75 Ohms
Output level C	1 Vs-s +/- 0.3 dB to 75 Ohms
Output level RED	0,7 Vs-s +/- 0.1Vp-p to 75 Ohms
Output level GREEN	0,7 Vs-s +/- 0.1Vp-p to 75 Ohms
Output level BLUE	0,7 Vs-s +/- 0.1Vp-p to 75 Ohms
S/N weighted	> 60 dB
Videotext
Teletext filtering	corresp. to ETS 300 472 standard
Scanning Teletext data	(FBAS) corresp. to ITU-R BT.653-
	2 lines: 6-22 and 320-335
Soft videotext	1000 pages memory
TV SCART:
Output:	RGB, FBAS or S-Video
VCR SCART:
Input:	RGB, FBAS or S-Video
Output:	FBAS
S-VHS Hosiden socket:
Output	Y signal (luminence),
	C signal (chrominence)
Hard drive:
Hard drive type	3,5 inch
Hard drive controller	intended for 80 to 250 GB
No. of recordings	999 (max.)
max. duration of recording
per recording	26 hours
Display:
Vacuum fluorescence	16-digit, 5x7 point matrix, 7 mm
	character height
Serial interface RS 232:
Type	RS 232, bidirectional
Bit rate	115,2 kBit/s max.
Connector	D-SUB socket, 9 pin
Function	Update for operating software and
	preprogramming
USB interface:
Type	USB 2.0 and USB 1.1 compatible
Bit rate	up to 480 Mbit/s (2.0) / up to 12
	Mbit/s (1.1)
Connector	1 USB host connector
Function	Update for operating software and
	preprogramming; USB stick; exter-
	nal hard drive;

103