TechniSat DigiCorder S2 manual Settings, Operating language, Loading SFI data

(Fig. 5-7)

(Fig. 5-8)

(Fig. 6-1)

Loading SFI data

Your digital receiver features an electronic programme guide (EPG) called SFI (SiehFern Info). For the data of this electro- nic programme guide to be displayed, you must first downlo- ad the SFI data from the satellite.

When you have completed the update of your programme list, resp. the programme scan, your receiver will automatically download the SFI data. This procedure can take up to 30 minutes.

>If you do not wish to wait for the SFI data to be down- loaded, you can skip this procedure. To do this, press the yellow function key Skip. (Fig. 5-7)

The SFI data will then be automatically updated the following night, or you can update them manually at any time (see Point 7.5.1).

Ending the installation assistant

>Confirm the final message

(Fig. 5-8)of the installation assistant by pressing the green function key Finish, to return to normal opera- tion.

6 Settings

Now that you have connected your new digital receiver, and commenced operating it, you can, if you wish, proceed to optimise its functions for your preferences.

6.1 Operating language

This menu item gives you the opportunity of setting the lang- uage used in all the menues according to your preference. To change the operating language proceed as follows:

>Use the Menu key to call up the Main menu. (Fig.

6-1)

>Now use the arrow keys up/down to mark the menu line Operating language.

>Confirm by pressing OK.

The sub-menu Operating language will be display- ed.

>Use the arrow keys up/down to select the desired language.

>Press the OK key to store the entry, and to return to the Main menu.

>Press the red function key Back to return to normal operation.

18