TechniSat DigiCorder S2 manual Timeshift-Funktion

>Use the arrow keys up/down to select the desired timer type.

>To accept the timer type, confirm by pressing OK.

>When you have completed the programming, press the green function key Accept, to transfer the data to memory.

Note!!!

Ensure that thereceiver has acquired the correct time. This is shown in the display while the receiver is in stand-by mode. If this is not the case, switch the receiver to a major channel such as ZDF, etc. for approx. 30 seconds, to acquire the time.

If it was activated under Point 6.2.4, the time should now be shown in the display in stand-by mode.

8.1.3 Timeshift-Funktion

The time-shift function provides the facility of recording and playing back at the same time. This is made possible by Time-Shift television. Thus you can already view the beginning of the recording, and can decide to skip over cer- tain passages already recorded (e.g. advertising blocks). At the same time, the live signal of the broadcast will continue to be recorded (see the following examples)

Example: Skipping advertising breaks

You would like to view a programme without the irritating advertising breaks ? The PVR allows you to simply skip over advertising breaks recorded.

Time

14:00

15:00

16:00

17:00

18:00

19:00

Recording

dung

W

W

W

W

Advertising break

Sen-

Progr

Sen-

Progr

Prog

of PVR

ram-

amm

Progr

amm

Playback by

Programme

PVR

Example: Time-shift playback

You have missed the start of the Formula 1 race? Not a problem!

The PVR will show you the race at a time-shifted time, while continuing to record the event.

	Time
		14:00		15:00		16:00	17:00	18:00	19:00
Recording			Start	/ Formula 1 / Stop
	of PVR
Playback by				Start /	Formula 1 /		Stop
	PVR

51