TechniSat DigiCorder S2 manual Playback function, Setting markers while recording

>To go to a specific point in a currently running recording, you can use the functions Play, Pause as well as Fast Wind and the Jogshuttle, as des- cribed in Point 8.2.

>Press the Info key to display the Infobox with a pro- gress bar, showing the playing and recording time elapsed.

8.1.4 Setting markers while recording

> Press the Record key to open a window showing the functions available.

(Fig. 8-6)

> Use the arrow keys up/down to mark the line Set mark, confirm by pressing OK.

(Fig. 8-6)

A marker will now be set at the current position. Continue in thiis manner to set markers at all desired places.

Markers can also be set during Playback mode (Point 8.2.1.5) as well as in the menu Manage hard drive (Point 8.3.1.3).

8.2 Playback function

The hard drive resp. the PVR navigator will provide access to your hard drive recordings.

8.2.1 Playing back recordings

8.2.1.1 Reproducing hard drive recordings

>During normal operation, press the green function key to open the PVR navigator.

Depending on whether you are in TV or radio mode, a list of all TV or radio recordings available on the hard drive will be displayed (Fig. 8-7). The marked recor- ding will already be played back in the preview win- dow.

(Fig. 8-7)

>Use the arrow keys up/down to select the recor- ding you wish to play.

>Confirm by pressing OK, to start the playback proce- dure. The message “Play ￿” will be displayed briefly.

52