(Fig.
(Fig.
Independently of whether you have switched the automatic updating function on or off, the receiver will check each time you switch it on whether a new version of the operating soft- ware for your digital receiver is available. If a new version of the operating software is available, this will be indicated by a message displayed on screen (Fig.
To start an update of the software, simply follow the instruc- tions on screen.
When the update of the software has been successfully com- pleted, an appropriate message will be displayed on screen.
>Press the green function key Continue to return to normal operation.
9.5.5 Copying settings
You have the facility to copy all the settings such as program- me list, antenna settings, etc. of your digital receiver (source, transmitter) to another digital receiver (target, receiver) of the same type, and equipped with the same version of operating software.
>To do this, connect the two receivers by means of a null modem cable.
>Switch on the target receiver.
>Use the arrow keys up/down to mark the line Copy settings and confirm by pressing OK. A mes- sage will be displayed (Fig.
>To copy the settings, press any key on the panel of the source receiver.
The settings of the source receiver will now be trans- ferred to the target receiver. Please note any messa- ges displayed on screen.
9.6 System configuration
This menu item allows you to see the specific receiver unit data (e.g. the current software version).
>Use the arrow keys up/down to mark this line in the
>Confirm by pressing OK.
>Press the Menu key to return to normal operation.
9.7 Encryption system
Under this menu item you can go to the
Manual initialisation of the CI module
>You can manually initialise the CI module by pressing the green function key CI Reset.
90