TechniSat DigiCorder S2 manual Audio/Video settings, Stand-by clock, Accepting settings

(Fig. 6-4)

(Fig. 6-5)

(Fig. 6-6)

6.2.4 Stand-by clock

n this line you can decide whether the current time is to be shown in the display while the receiver is in stand-by mode.

>In this line, use the arrow keys left/right to set the mode of the stand-by clock to on or off.

Accepting settings

To accept and store the settings made in this menu, proceed as follows:

>Press the green function key Accept. The changes made will be saved, and you will be returned to the menu Settings.

alternatively:

>Press the red function key Back.

A query message will now be displayed (Fig. 6-4).

>Use the arrow keys left/right to mark the field Yes, if you wish to accept the changes made, and confirm by pressing OK.

You will now return to the previous menu.

>Press the TV/Radio key to return to normal operating mode. The settings will not be saved.

6.3 Audio/Video settings

To optimise the digital receiver for use with your television set, you can make further settings in the menu Audio/Video settings.

>Press the Menu key to call up the Main menu.

>Use the arrow keys up/down to mark the line

Settings.

>Confirm by pressing OK.

The sub-menu Settings will be displayed. (Fig. 6-5)

>Now use the arrow keys up/down to mark the line

Audio/Video settings.

>Confirm by pressing OK.

The menu Audio/Video settings will be displayed. (Fig. 6-6)

>Use the arrow keys up/down to move the marker within the menu, and to change the individual settings as indicated.

When selecting a menu item, please also note any messages displayed on screen. The following settings can be made:

20